Hello all, this is my first post and last resort in trying to get to the bottom of my ongoing, relentless, continuous, unabating issues with my Saab. I've owned it since January of this year and it's been in the garage at least once a month with what I assume are interrelated issues, however the garage are now rapidly running out of ideas (I can sense this) and so am I....
Below is a breakdown of the symptoms I am experiencing, any codes I have found and then below the parts changed/work carried out so far:
Poor starting - white/blue tinged smoke upon startup, acrid smell. Cured in part by repeating glow plug warm up process, but occasionally get water in fuel warning on HUD and/or ABS malfunction warning.
Stutter/Hesitation/Misfire between 1500-2000rpm on very light throttle in lower gears, not noticeable if gunning it.
Inability to regen...ever, EML light
always comes on.
When boosting hard in 5th gear (spirited driving), boost cut and then EML, which then clears after a few starts.
NEW - sometimes boost occurs in stages or surges
NEW - EML light when boosting under load regardless of where, generally in higher gears, seems to be load related, ok if going downhill for example.
LATEST - If I even think about going anywhere near a motorway EML comes on with Limp mode
Codes - Now always getting P1901, but also had P0900 and consistently P2279 pretty much since March time.
My problems have appeared to be very similar to the guy posting here (sorry for advertisement of competitor forum...) apart from the 'NEW' problems above, my frustrations also mirror his, with garages and mechanics
.
http://uksaabs.co.uk/UKS/viewtopic.php?f=2&t=77156
Since owning it's had replaced, Fuel rail, EGR (twice), MAF and MAP swapped just in case. DPF cleaned twice as a result of not being able to regen. Actuator/Turbo checked, swirl flaps checked, TB checked, Vac lines checked and intercooler checked..I think.
It's been checked front to back in terms of air system countless times by the garage who can find nothing really out of order. Along with this it's been Tech2'd more times than I can count and again the computer doesn't suggest that there's anything wrong with sensor values etc...
Sorry for the lengthy post all, but it's had quite a history...as you can see...
Happy to answer any further question to help provide context for any ideas for resolution. Your help could be life saving....really..
Below is a breakdown of the symptoms I am experiencing, any codes I have found and then below the parts changed/work carried out so far:
Poor starting - white/blue tinged smoke upon startup, acrid smell. Cured in part by repeating glow plug warm up process, but occasionally get water in fuel warning on HUD and/or ABS malfunction warning.
Stutter/Hesitation/Misfire between 1500-2000rpm on very light throttle in lower gears, not noticeable if gunning it.
Inability to regen...ever, EML light

When boosting hard in 5th gear (spirited driving), boost cut and then EML, which then clears after a few starts.
NEW - sometimes boost occurs in stages or surges
NEW - EML light when boosting under load regardless of where, generally in higher gears, seems to be load related, ok if going downhill for example.
LATEST - If I even think about going anywhere near a motorway EML comes on with Limp mode
Codes - Now always getting P1901, but also had P0900 and consistently P2279 pretty much since March time.
My problems have appeared to be very similar to the guy posting here (sorry for advertisement of competitor forum...) apart from the 'NEW' problems above, my frustrations also mirror his, with garages and mechanics

http://uksaabs.co.uk/UKS/viewtopic.php?f=2&t=77156
Since owning it's had replaced, Fuel rail, EGR (twice), MAF and MAP swapped just in case. DPF cleaned twice as a result of not being able to regen. Actuator/Turbo checked, swirl flaps checked, TB checked, Vac lines checked and intercooler checked..I think.
It's been checked front to back in terms of air system countless times by the garage who can find nothing really out of order. Along with this it's been Tech2'd more times than I can count and again the computer doesn't suggest that there's anything wrong with sensor values etc...
Sorry for the lengthy post all, but it's had quite a history...as you can see...
Happy to answer any further question to help provide context for any ideas for resolution. Your help could be life saving....really..