Vauxhall Owners Network Forum banner

Meriva B workshop manual?

1 reading
10K views 10 replies 5 participants last post by  Koicarpkeeper  
#1 ·
I’m looking for a Meriva B workshop manual, mostly to get the right torque values for the parts I have to replace.

Any help finding one or the right torque for each part is much appreciated!
 
#7 ·
Ok
Driveshaft hub nut
Tighten the fastener to 160 N·m (118 lb ft) ..
Loosen the fastener.
Tighten the fastener to 20 N·m (15 lb ft) .
Tighten the fastener to 80°
Water pump 24 Nm
Brakes
Brake disc to hub Front 7 Nm
Brake caliper to carrier Front 28 Nm
Brake caliper/carrier to hub Front 100 Nm
Brake disc to hub Rear 4 Nm
Brake caliper to carrier Rear 25 Nm
Brake caliper/carrier to hub Rear 100 Nm
ABS sensor Front 8 Nm
ABS sensor Rear 8 Nm
Road wheels 110 Nm
Turbocharger
tighten to 24 Nm then 48Nm
 
#8 ·
Ok
Driveshaft hub nut
Tighten the fastener to 160 N·m (118 lb ft) ..
Loosen the fastener.
Tighten the fastener to 20 N·m (15 lb ft) .
Tighten the fastener to 80°
Water pump 24 Nm
Brakes
Brake disc to hub Front 7 Nm
Brake caliper to carrier Front 28 Nm
Brake caliper/carrier to hub Front 100 Nm
Brake disc to hub Rear 4 Nm
Brake caliper to carrier Rear 25 Nm
Brake caliper/carrier to hub Rear 100 Nm
ABS sensor Front 8 Nm
ABS sensor Rear 8 Nm
Road wheels 110 Nm
Turbocharger
tighten to 24 Nm then 48Nm
Thank you so much, the dealership wouldn’t help me with this so I have been looking online without much luck.
Have a great day!
 
#11 ·
Clipped behind the front bumper.