My car is suffering from two fault codes at the moment which I have idea what they relate to so hoping opcom will narrow them down

 

I usually do a total vehicle readout so scans all ecu's

 

Thanks for that info will bear it in mind !

 

NEVER EVER press a button marked reset on the opcom screen. Erase is the one to clear codes, reset turns your systems back to factory default, and your car into a home for your garden gnomes/ dog/ mother in law and of course you if it happens to be the other halfs car.

 

Hi guys,

Thanks for the replies I will give it ago when it turns up in the post.

Thanks

Cameron

 

If you want to clear the fault codes you need to connect to whatever module you require and then go to "fault codes" at the top right and then it will read all the fault codes. If there are any there they will be displayed. You can choose to save them. You can choose to print them too. If you want to delete the fault codes you just go to "clear fault codes".

 

Have you installed it yet?