you need to buy this first,

http://www.ebay.co.uk/itm/Vauxhall-...-1-0-1-2-1-4-/110991675975?pt=UK_Diagnostic_Tools_Equipment&hash=item19d79e9247

OK thanks. Have you done one and is it straight forward? The Vauxhall TIS shows supporting the engine in a frame to remove the engine support. Can you do this on a couple of trolley jacks?

Thanks
Andy

 

Found this on Youtube..

 

Yes i normally put a trolley jack under the engine, but don`t forget to use a piece of plywood just to help spread the weight. You will also need to replace the oil and filter as you will get water in the sump when removing the cover.

 

id suggest getting a timing chain kit from vauxhall as the cheap ones will not last 5 mins. take a read though this thread and you will see why its best to fit a vauxhall kit

http://www.vauxhallownersnetwork.co...eriva-with-z-xep-engine-only-fit-full-genuine-vauxhall-timing-chain-kit.255405/

 

Thanks for all the replies. I will give it go in the new year. Have a merry christmas to all on the forum.

Andy