Vauxhall Owners Network Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Hi just replaced the head cant remember how to line up timing marks. Left camshaft pulley is easy allign notch on pulley with notch on cover but right pulley has two notchs one marked inlet and one marked exhaust cant remember which one to line up Haynes manual has crap picture as usual thanks in advance.
 

·
Registered
Joined
·
48 Posts
sorry tried to do it but wont let me get it to a size where ou can see it clearly

but basically as you look at the cams the one on the left should be set to intake and the one on the right set to exhaust the other 2 marks should be opposite each other once set correctly
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top