got a vectra b cdx electronic heater controls.
car blowing cold air constantly, although the heater shows its altering temp no difference, do these have solenoid valves for this and is so can some1 point me in right direction thanks
put hands on matrix pipes at side of console and were hot, this has an electronic adjuster so its not the twist cable type,if pipes there are hot then i should be looking at possibly a electronic flap to let hot air through am i not, is this a case of removing the front heater switches etc as no access anyware being the cdx.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.