Vauxhall Owners Network Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Vauxhall Vectra GLS: 2LT: 16 Valve: Auto Estate: 1999

Hi all,
On the bottom edge of my front bumper: There's a rubber strip of about 3 to 4 inches (75/100mm) high, which has come adrift from the plastic edge of the bumper.

It's ends are held in some plastic parts at each end of the main bumper, so its hanging down in the middle.

So what holds this in place ?
And what do I need to do to fix it ?

Thanks.
 

·
Registered
Joined
·
13 Posts
I know its a minor issue but I would lie to know if you made any progress on this macmac please?
Have the same issue on a later Astra Sport Tourer, just a little when I bought it so all pushed back and seemed fine.
I keep finding it finding it's way off the edge time after time. Fortunately far enough to get fully ripped off.
I have seen a push on edging stuff that may fare better, if this cannot be rectified easily. It just doesn't stay on too long when refitted....

Thanks
 
1 - 2 of 2 Posts
Top