Vauxhall Owners Network Forum banner

1 - 20 of 754 Posts

·
Registered
Joined
·
181 Posts
Discussion Starter #1
managed to source a list of upto date fault codes, may come in useful (admin, maybe sticky??)

P0030 O2 Sensor Heater Circuit Range/Performance (Bank 1 Sensor 1) C-29
P0036 O2 Sensor Heater Circuit Range/Performance (Bank 1 Sensor 2) C-31
P0100 Mass or volume air flow circuit high input C-10
P0100 Mass or volume air flow circuit low input C-10
P0110 Intake Air Temperature Circuit High Input C-12
P0110 Intake Air Temperature Circuit Low Input C-12
P0115 Engine Coolant Temperature Circuit High Input C-11
P0115 Engine Coolant Temperature Circuit Low Input C-11
P0115 Engine coolant temperature circuit malfunction C-11
P0120 Throttle Position Sensor (TPS) Circuit 1 Voltage High C-09
P0120 Throttle Position Sensor (TPS) Circuit 1 Voltage Low C-09
P0120 Throttle Position Sensor 1-2 Correlation C-09
P0130 O2 Sensor Circuit High Voltage (Bank 1 Sensor 1) C-30
P0130 O2 Sensor 1 Circuit Voltage Low C-30
P0130 O2 Sensor 1 Open Circuit C-30
P0130 O2 Sensor 1 Incorrect Signal C-30
P0134 O2 Sensor Circuit Open (Bank 1 Sensor 1) C-30
P0135 O2 Sensor Heater Circuit High Voltage (Bank 1 Sensor 1) C-29
P0135 O2 Sensor Heater Circuit Low Voltage (Bank 1 Sensor 1) C-29
P0135 O2 Sensor Heater Circuit Open (Bank 1 Sensor 1) C-29
P0136 O2 Sensor Circuit High Voltage (Bank 1 Sensor 2) C-32
P0136 O2 Sensor 2 Circuit Voltage Low C-32
P0136 O2 Sensor 2 Open Circuit C-32
P0139 O2 Sensor 1 Incorrect Signal C-30
P0140 O2 Sensor 2 Incorrect Signal C-32
P0141 O2 Sensor Heater Circuit High Voltage (Bank 1 Sensor 2) C-31
P0141 O2 Sensor Heater Circuit Low Voltage (Bank 1 Sensor 2) C-31
P0141 O2 Sensor Heater Circuit Open (Bank 1 Sensor 2) C-31
P0170 Rich Exhaust C-30
P0170 Lean Exhaust C-30
P0201 Cylinder 1 injector circuit high C-23
P0201 Cylinder 1 injector circuit low C-23
P0201 Cylinder 1 Injector Circuit Open C-23
P0202 Cylinder 2 injector circuit high C-24
P0202 Cylinder 2 injector circuit low C-24
P0202 Cylinder 2 Injector Circuit Open C-24
P0203 Cylinder 3 injector circuit high C-25
P0203 Cylinder 3 injector circuit low C-25
P0203 Cylinder 3 Injector Circuit Open C-25
P0204 Cylinder 4 injector circuit high C-26
P0204 Cylinder 4 injector circuit low C-26
P0204 Cylinder 4 Injector Circuit Open C-26
P0219 Engine overspeed condition C-43
P0220 Throttle Position Sensor (TPS) Circuit 2 Voltage High C-09
P0220 Throttle Position Sensor (TPS) Circuit 2 Voltage Low C-09
P0220 Throttle Position Sensor 1-2 Correlation C-09
P0230 Fuel pump secondary circuit high C-07
P0230 Fuel Pump Relay Open Circuit C-07
P0300 Misfire Unidentified Cylinder Detected B-21
P0301 Cylinder 1 Misfire Detected B-22
P0301 Cylinder 1 Misfire Detected B-22
P0301 Cylinder 1 Misfire Detected B-22
P0302 Cylinder 2 Misfire Detected B-22
P0302 Cylinder 2 Misfire Detected B-22
P0302 Cylinder 2 Misfire Detected B-22
P0303 Cylinder 3 Misfire Detected B-22
P0303 Cylinder 3 Misfire Detected B-22
P0303 Cylinder 3 Misfire Detected B-22
P0304 Cylinder 4 Misfire Detected B-22
P0304 Cylinder 4 Misfire Detected B-22
P0304 Cylinder 4 Misfire Detected B-22
P0325 Knock Sensor 1 Circuit no Signal C-27
P0335 Crankshaft Sensor Incorrect Signal C-06
P0335 Crankshaft Sensor Open Circuit C-06
P0335 Crankshaft Sensor Incorrect Signal C-06
P0340 Camshaft Position Sensor Circuit No Signal C-13
P0340 Camshaft Sensor Incorrect Signal C-13
P0351 Ignition Coil 1 High Input B-23
P0351 Ignition Coil 1 Incorrect Signal B-23
P0352 Ignition Coil 2 High Input B-23
P0352 Ignition Coil 2 Incorrect Signal B-23
P0353 Ignition Coil 3 High Input B-23
P0353 Ignition Coil 3 Incorrect Signal B-23
P0354 Ignition Coil 4 High Input B-23
P0354 Ignition Coil 4 Incorrect Signal B-23
P0420 Catalyst Efficiency Above Threshold C-31
P0443 Evaporative emission control system purge control valve circuit shorted C-28
P0443 Evaporative emission control system purge control valve circuit shorted C-28
P0443 Evaporative emission control system purge control valve circuit open C-28
P0460 Fuel Level Sensor Circuit High Input C-14
P0460 Fuel Level Sensor Circuit Low Input C-14
P0460 Purge flow sensor circuit malfunction C-14
P0500 Vehicle speed sensor malfunction B-10
P0530 A/C Refrigerant Pressure Sensor Circuit High Input Air Conditioning System B-05
P0530 A/C Refrigerant Pressure Sensor Circuit Open Air Conditioning System B-05
P0560 System Voltage High Input C-04
P0560 System Voltage Low Input C-04
P0565 Cruise Control SET and RESUME active C-17
P0566 Cruise Control Off Signal Circuit no or Incorrect Signal C-17
P0567 Cruise Control Resume Signal High Input C-17
P0568 Cruise Control Set Signal Circuit High Input C-17
P0571 Brake Switch Circuit Low Input C-15
P0602 Powertrain Control Module Not Programmed C-02
P0602 Security Code Not Programmed C-02
P0602 Vehicle Identification Number Not Programmed C-02
P0602 Variant-Coding Not Programmed C-02
P0606 Control Unit Re-Initialisation C-02
P0650 Malfunction Indicator (MI) Control Circuit High C-36
P0650 Malfunction Indicator (MI) Control Circuit Open C-36
P0700 EOBD Error stored by Transmission Control (TC) Modul B-06
P0700 MIL request from Transmission Control (TC) Modul B-06
P0704 Clutch Switch Input Circuit High Input C-16
P1110 Variable Intake Manifold Signal High C-33
P1110 Variable Intake Manifold Signal Low C-33
P1110 Variable Intake Manifold Open Circuit C-33
P1120 Accelerator Pedal Position Sensor 1 High Input C-08
P1120 Accelerator Pedal Position Sensor 1 Low Input C-08
P1120 Accelerator Pedal Position Sensor 1-2 Correlation C-08
P1122 Accelerator Pedal Position Sensor 2 High Input C-08
P1122 Accelerator Pedal Position Sensor 2 Low Input C-08
P1130 O2 Sensor 1 Signal Out of Range C-30
P1130 O2 Sensor 1 Signal no Activity detected C-30
P1130 O2 Sensor 1 Signal Switching Time Error C-30
P1170 System too rich (Bank 1) C-30
P1170 System too lean (Bank 1) C-30
P1230 Main Relay Circuit Voltage High C-03
P1230 Main Relay Open Circuit C-03
P1326 Knock Control Maximum Spark Limit Cylinder 1 C-27
P1327 Knock Control Maximum Spark Limit Cylinder 2 C-27
P1328 Knock Control Maximum Spark Limit Cylinder 3 C-27
P1329 Knock Control Maximum Spark Limit Cylinder 4 C-27
P1372 Crankshaft Sensor Segment Error C-06
P1372 Crankshaft Sensor Adaption Error C-06
P1481 Fan Relay 1 Circuit High C-34
P1481 Fan Relay 1 Signal Low / Open Circuit C-34
P1482 Fan Relay 2 Circuit High C-34
P1482 Fan Relay 2 Signal Low / Open Circuit C-34
P1500 Electronic Throttle Control Motor Failure C-09
P1500 Electronic Throttle Control Motor Failure C-09
P1520 Powerstage Currentless C-02
P1525 Limp Home Position Error C-09
P1526 Throttle Position Adaption Error C-09
P1526 Throttle Position no Adaption C-09
P1526 Limp Home Adaption Error C-09
P1526 Lower Limit Adaption Error C-09
P1530 A/C Relay Voltage High Air Conditioning System B-10
P1530 A/C Relay Circuit Open Air Conditioning System B-10
P1540 Air Conditioning Pressure Invalid Signal Air Conditioning System B-10
P1540 Air Conditioning Pressure Signal High Input Air Conditioning System B-05
P1540 Air Conditioning Pressure Signal Low Input Air Conditioning System B-10
P1540 Air Conditioning Pressure Open Circuit Air Conditioning System B-05
P1540 Air Conditioning Pressure Invalid Signal Air Conditioning System B-10
P1550 Electronic Throttle Control Reduced Power C-09
P1550 Electronic Throttle Control Forced Idle C-09
P1550 Electronic Throttle Control Power Management C-09
P1550 Electronic Throttle Control Engine Stop C-09
P1551 Engine Torque Always Higher Than Expected C-02
P1555 Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load C-09
P1600 Reprogram or Replace Electronic Control Unit (ECU) C-02
P1606 Replace Electronic Control Unit (ECU) C-02
P1606 Replace Electronic Control Unit (ECU) C-02
P1606 Replace Electronic Control Unit (ECU) C-02
P1610 Security Code Not Programmed Immobiliser B-07
P1611 Wrong Security Code Entered Immobiliser C-02
P1612 Immobiliser No Or Wrong Signal Immobiliser C-05
P1613 Immobiliser No Or Wrong Signal Immobiliser C-05
P1614 Wrong Security Code received Immobiliser C-06
P1614 Wrong Security Code received Immobiliser C-06
P1615 Wrong Vehicle ID from Body Control Module C-40
P1616 Wrong Vehicle ID from Instrument Control Module C-40
P1650 Service Vehicle Soon Light Voltage High C-37
P1650 Service Vehicle Soon Light Voltage Low C-37
P1700 SVS request via CAN B-06
U2100 CAN-BUS Malfunction C-05
U2101 CAN-BUS Maximum Configuration List not Programmed C-05
U2104 CAN-BUS reset counter overrun C-05
U2106 CAN-BUS no Communication with TCM B-05
U2108 CAN-BUS no Communication with ABS/TC B-08
 

·
Registered
Joined
·
181 Posts
Discussion Starter #4
Nice list! Combined with the method of reading codes without plugging any tech in, that might be very useful. Do these codes cover most models?
yer corsa's and astra's and zafira's it works for up to now and for people who dont know how do the "pedal trick"

No need for Tech 2 or any sort of code readers and Most of Vauxhall dealers don’t know about this....

When you get into the car you know the key has 3 clicks first on for aftermarket cd player and whatever else and the second one the dash comes on third the starter kicks in

before you put the key into the ignition Make sure that you Press the Break and the Throttle to the Floor ( max )
Then turn the key on until The dash board come on and DONT START THE CAR
Wait 2 sec and keep the pedals Down to the floor
the service light under the management light should start flashing

it will flash 4 times leaving 2 second space representing each number
Zero gets 10 flashes

for exampleP0110
the light will flash ten times Break (2sec Or 1 not sure) then once, (2sec) once again, then ten

if you have more than one code it will stop for a break then gives the next code

however if you don’t have any code stored it will start Flashing and keeps on flashing until you release the paddles
 

·
Registered
Joined
·
5 Posts
so i have done the pedal trick andit just keeps flashin constently until i release the pedals, what could be my problem be now, i still have all the symptoms of a computer failure, hesitant off the mark, can't go over 80m.p.h because when i come off onto the slip road and press the brake the engine just cuts out, i have grey slime on the cap of my oil re-fill cap. but no symptoms of a gasket gone other than that one? any ideas????????????
yer corsa's and astra's and zafira's it works for up to now and for people who dont know how do the "pedal trick"

No need for Tech 2 or any sort of code readers and Most of Vauxhall dealers don’t know about this....

When you get into the car you know the key has 3 clicks first on for aftermarket cd player and whatever else and the second one the dash comes on third the starter kicks in

before you put the key into the ignition Make sure that you Press the Break and the Throttle to the Floor ( max )
Then turn the key on until The dash board come on and DONT START THE CAR
Wait 2 sec and keep the pedals Down to the floor
the service light under the management light should start flashing

it will flash 4 times leaving 2 second space representing each number
Zero gets 10 flashes

for exampleP0110
the light will flash ten times Break (2sec Or 1 not sure) then once, (2sec) once again, then ten

if you have more than one code it will stop for a break then gives the next code

however if you don’t have any code stored it will start Flashing and keeps on flashing until you release the paddles
 

·
Registered
Joined
·
181 Posts
Discussion Starter #10
so i have done the pedal trick andit just keeps flashin constently until i release the pedals, what could be my problem be now, i still have all the symptoms of a computer failure, hesitant off the mark, can't go over 80m.p.h because when i come off onto the slip road and press the brake the engine just cuts out, i have grey slime on the cap of my oil re-fill cap. but no symptoms of a gasket gone other than that one? any ideas????????????
sounds like a shortage somewhere and your oil might need changing ?
 

·
Registered
Joined
·
11 Posts
NO NO NO ,,, if the light keeps flashing means no codes are stored or pending , your car's symptoms are more like EGR valve which will not necessarily trigger a fault code , clean it or replace it ,
the grey slime is just common to 8v build up condensation inside the engine combined with short cold journeys
 

·
Registered
Joined
·
4 Posts
This is very useful information. Thanks.

I just came from the mechanic and his system was showing following codes as undocumented code. I have a problem that my dual fuel car is not giving power on 4th and 5th gear on Petrol. It is running fine on LPG. I have this problem from quiet sometime and hence using care only on LPG. I have driven around 5K miles on LPG without any major problem but the problem on Petrol still exists. Two local mechanic told me that ECU needs to be replaced and cost is very high. Not worth spending on 2002 model old car! Don't know what should I do? Any good suggesstion!

P0650P0650 Malfunction Indicator (MI) Control Circuit High C-36
P0650 Malfunction Indicator (MI) Control Circuit Open C-36
P1555Throttle Position Sensor (TPS) Load Signal not Plausible with Engine Load C-09P0201P0201 Cylinder 1 injector circuit high C-23
P0201 Cylinder 1 injector circuit low C-23
P0201 Cylinder 1 Injector Circuit Open C-23
P0301P0301 Cylinder 1 Misfire Detected B-22
P0301 Cylinder 1 Misfire Detected B-22
P0301 Cylinder 1 Misfire Detected B-22
P0134P0134 O2 Sensor Circuit Open (Bank 1 Sensor 1) C-30P1612P1612 Immobiliser No Or Wrong Signal Immobiliser C-05P1613P1613 Immobiliser No Or Wrong Signal Immobiliser C-05P0302P0302 Cylinder 2 Misfire Detected B-22
P0302 Cylinder 2 Misfire Detected B-22
P0302 Cylinder 2 Misfire Detected B-22
P0303P0303 Cylinder 3 Misfire Detected B-22
P0303 Cylinder 3 Misfire Detected B-22
P0303 Cylinder 3 Misfire Detected B-22
 

·
Registered
Joined
·
22 Posts
does it drive normally on petrol at lower speeds ? try removing plug from injector no1 and driving then report results. also start a new thread.
 

·
Premium Member
Joined
·
344 Posts
Hi
I do not know where to ask this question,
I have a zafira 2,00 dti.vauxhall say it is obd11 compliant.would that mean one of the cheaper readers would work.They say they will not on pre 2004 dti as they are not obd11 compliant this one has the right plug under the handbrake.
any ideas?
 

·
Registered
Joined
·
7 Posts
I have tried this method, there is no light flashing, i have tried pressing peddels befor puting key in
/tried puttin key first, still no light flash. all that happend is the glowplug light goes off.
Zafira 2.0 y20dth 2005.
Problem is on power one min then next it takes off with on a small press on acc
Should this method work on this car.
 

·
Registered
Joined
·
181 Posts
Discussion Starter #18
I have tried this method, there is no light flashing, i have tried pressing peddels befor puting key in
/tried puttin key first, still no light flash. all that happend is the glowplug light goes off.
Zafira 2.0 y20dth 2005.
Problem is on power one min then next it takes off with on a small press on acc
Should this method work on this car.
are you pressing the brake and acceleration down to the floor and waiting till all the dash lights glow up then the car with the spanner should light up ?
 

·
Registered
Joined
·
181 Posts
Discussion Starter #19
Hi
I do not know where to ask this question,
I have a zafira 2,00 dti.vauxhall say it is obd11 compliant.would that mean one of the cheaper readers would work.They say they will not on pre 2004 dti as they are not obd11 compliant this one has the right plug under the handbrake.
any ideas?

it should do works for a corsa c and astra mk4 which is same base as the zafira
 
1 - 20 of 754 Posts
Top