Vauxhall Owners Network Forum banner

1 - 20 of 24 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
Hi i can’t get my op com to work keep getting error message when i run it connected to my zaf b could Marks152 pm me please i believe he sorted others out on here using some kind of screen sharing many thanks in advance because pulling my hair out now Interface communication error, or interface not powered from car!"
 

·
Worn Out Member
Joined
·
5,296 Posts
which driver version is loaded ?
 

·
Worn Out Member
Joined
·
5,296 Posts
You need to go to "control panel----device manager"----- it should be shown under usb devices,
probably as opcom or usb serial converter.
Right click it and select properties,click on driver box and it'll show what's loaded
 

·
Worn Out Member
Joined
·
5,296 Posts
see my earlier reply
 

·
Well-known member
Joined
·
11,983 Posts
You will see something like this

90683


This is NOT for an OpCom / Vauxcom unit but it shows you what window you are looking for.
 

·
Registered
Joined
·
19 Posts
You need to go to "control panel----device manager"----- it should be shown under usb devices,
probably as opcom or usb serial converter.
Right click it and select properties,click on driver box and it'll show what's loaded
Cheers for your help see pic for driver thanks
 

·
Worn Out Member
Joined
·
5,296 Posts
That's a fairly old driver,what opcom software version are you trying to get working ?
 
1 - 20 of 24 Posts
Top