Vauxhall Owners Network Forum banner

1 - 20 of 22 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter #1
Hiya

Ive installed the new stalk.

Followed the guides ie:

GO TO body, IPC, programming, program varient and comes up with this error:

93574


I have rebooted the laptop, turned car off and on etc

each time the same. the other bits went fine and asked for code etc.

any ideas kids?
 

·
Worn Out Member
Joined
·
6,430 Posts
I reckon the 100219 software is too old to do that particular job
 
  • Like
Reactions: andy_v

·
Worn Out Member
Joined
·
6,430 Posts
As i explained on your other thread about opcom,getting slightly later software isn't the issue it's that most opcoms now run fake chips so running later software runs the risk of bricking the unit as it tries to update the firmware.
 
  • Like
Reactions: andy_v

·
Super Moderator
Joined
·
14,459 Posts


why could ya not ask this question in that thread, which i have now locked.


this thread was only posted the other day......
 

·
Worn Out Member
Joined
·
6,430 Posts
so, buy a new opcom ?
yes as long has it's running much later software,or try some later software on yours and see if it bricks it.
 
  • Like
Reactions: andy_v

·
Registered
Joined
·
40 Posts
Discussion Starter #8
Mine says in opcom, its firmware version V0.199

Does that mean anything ?

any links to help me out ?

cheers
 

·
Worn Out Member
Joined
·
6,430 Posts
That's definitely fake firmware so it will be running a fake chipset,the choice is yours,
@Koicarpkeeper should be able to supply a later unit or i could link you to a copy of 2012 software to try at your own risk,
the choice is yours
 
  • Like
Reactions: andy_v

·
Worn Out Member
Joined
·
6,430 Posts
check your pm's
 
  • Like
Reactions: andy_v

·
Well-known member
Joined
·
13,684 Posts
well, i may as well try the 2012 one and if it blows up ill buy a new one :)

(if u hear a boom you know its my black box lol)
I like your style.
 
  • Like
Reactions: andy_v

·
Worn Out Member
Joined
·
6,430 Posts
Any update ?
 

·
Registered
Joined
·
40 Posts
Discussion Starter #14
Hoya, well I’m stuck on the activate screen. I’ve been googling trying to get round it but no dice

it says I can't use it until it’s activated.

Good news is that cruise control is working!! Just the tell take light on dash doesn’t illuminate when CC is on !
 

·
Well-known member
Joined
·
13,684 Posts
.......Good news is that cruise control is working!! Just the tell take light on dash doesn’t illuminate when CC is on !
Try an "All telltales" output test in the INC to see if the bulb is actually there and working
 

·
Registered
Joined
·
40 Posts
Discussion Starter #16
Hi yes it’s all there and works on the test.

the issue is opcom crashes when I try to enable that bit so I presume whilst the Car knows CC is there? The dash doesn’t know to illuminate the light of that makes sense !
 

·
Well-known member
Joined
·
13,684 Posts
Makes sense.
And that's using the later 120309a software?
 

·
Registered
Joined
·
40 Posts
Discussion Starter #18
Erm yes that’s the number on it yes.

I can live with that so long as it works which it seems to fine !!
 

·
Worn Out Member
Joined
·
6,430 Posts
Hoya, well I’m stuck on the activate screen. I’ve been googling trying to get round it but no dice

it says I can't use it until it’s activated.
Erm yes that’s the number on it yes.

I can live with that so long as it works which it seems to fine !!
I'm confused, is the 120309 working or is it asking to be activated ?
 
1 - 20 of 22 Posts
Top