Vauxhall Owners Network Forum banner

1 - 9 of 9 Posts

·
VxON Elite
Joined
·
1,406 Posts
Discussion Starter · #1 ·
today i decided to get my central locking working i traced it down to the imobiliser it had been bypast so i decided to wire the plug back up now i have central locking again but the car wont start i took the imobiliser out the v6 because i know it works pluged it in and it wont start realy need help with this guys heres a pic of the wires.
 

·
Premium Member
Joined
·
7,328 Posts
you need the little chip from inside the key and there is a thing that fits round the barrel
 

·
Premium Member
Joined
·
7,328 Posts
well if there is anything to plug the barrel thing into, and they are all from the same car yes
 

·
VxON Elite
Joined
·
1,406 Posts
Discussion Starter · #8 ·
it's fooked now took the barell of the v6 then took the one of mine and it fell to pieces and the one from the v6 is diferent :down:
 

·
Premium Member
Joined
·
2,998 Posts
There is nothing around the barrel on that type,Its the bosch immobiliser with the single button remote that was used before the passive type (chip in key).bypassing it properly will have no efect on the central locking.
 
1 - 9 of 9 Posts
Top