Vauxhall Owners Network Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have 2.2 2002 Vauxhall movano flat bed recovery truck
When I bright it it was clunking on the passenger side so tuck it for mot and the lower ball joint was not holding in the pin frame the previous owner had put a normal thread bolt so did not grip it and the control arm had put a grove in the disc
So have put a new ball joint in the correct pin holding it correctly now no play but the control are is still touching the disc has any one had this issue or know the cause
 

·
Premium Member
Joined
·
540 Posts
Don't know much about these vans but looking at an on-line catalogue there seems to be different control arms for normal and increased ground clearance suspensions.
These part numbers were shown. Note NLS means No Longer Supplied.

https://webautocats.com/epc/opel/x70/k/

Front suspension arm / Opel EPC: EPC / Opel / MOVANO-A / K / 3
№ Name Part number GM number
LOWER (EXCEPT INCREASED GROUND CLEARANCE)
11 Arm assy., front susp, lower, LH (NLS) - use 9112047 44 04 047) 1 45 00 092 9160392
11 Arm assy., front susp, lower, LH (steel) (NLS - use 9109940 44 01 940) 1 44 04 047 9112047
11 Arm assy., front susp, lower, LH (steel) (NLS. - use 9109852 44 01 852) 1 44 01 940 9109940
11 Arm assy., front susp, lower, LH (cast iron) (NLS. - use 93192689 44 18 212) 1 44 01 852 9109852 11 Arm assy., front susp, lower, LH (cast iron) 1 44 18 629 93194853
11 Arm assy, front susp, lower, RH (cast iron) (NLS) - use 93192690 44 18 213) 1 44 01 853 9109853

LOWER (FOR INCREASED GROUND CLEARANCE)
11 Arm assy, front susp, lower RH (cast iron) 1 44 18 630 93194855
11 Arm assy., front susp, lower LH (NLS use 9109852 44 01 852) 1 44 01 940 9109940
11 Arm assy., front susp, lower LH (NLS use 93192689 44 18 212) 1 44 01 852 9109852
 
1 - 2 of 2 Posts
Top