Vauxhall Owners Network Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I'm having problems! Not starting. Spins but not firing. It looks like my cars ecu's are not communicating. Ran an ISS
Any ideas? I had a vivaro with similar and that was a corroded connector.

Many thanks
Computer Personal computer Font Display device Screenshot
Computer Personal computer Font Flat panel display Gadget
 

·
Registered
Tigra Twintop 1.8 AT Z18XE AF17
Joined
·
1,103 Posts
Ecu works well, you don’t know how to use that autocom clone.
 

·
Super Moderator
Joined
·
17,686 Posts
Ecu works well, you don’t know how to use that autocom clone.

come on mate, thats not a very helpful answer, this is why these forums exist, so people that dont know can come and ask and learn.
 

·
Registered
Tigra Twintop 1.8 AT Z18XE AF17
Joined
·
1,103 Posts
I thought was pretty much obvious, autocom does not know on autoscan which ecu model there is, it can see one but user has to select the exact engine type.
 

·
Registered
Joined
·
6 Posts
Discussion Starter · #6 ·
I thought was pretty much obvious, autocom does not know on autoscan which ecu model there is, it can see one but user has to select the exact engine type.
Look at the second photo. Engine ecu is fine. No comments with most other modules.
 

·
Registered
Tigra Twintop 1.8 AT Z18XE AF17
Joined
·
1,103 Posts
Second photo? Click on the right engine code and you’ll have the engine ecu scanned.

you can’t claim no comm using a clone autocom which may even be a 2 pcb model.

engine cranking means immo is fine.
 
1 - 7 of 7 Posts
Top