Vauxhall Owners Network Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hi Folks
I've recently fitted 4 X G Cams to my MV6 2.6 2002 model
New Belt using Belt fixing kit to standard spec TDC etc
Tundra little lumpy on Idle
Is this common to have this with the G Cam conversion
Peter Young
 

·
Registered
Joined
·
104 Posts
No it should tick over as normal with 4 x G Cams.

Did you use a proper timing belt kit to set it all up.
 

·
Registered
Joined
·
11 Posts
Discussion Starter #3
Hi
Thank you for your reply
Yes I used a Gates Belt Kit and I purchased a Timing kit
It's not a bad idle but not smooth as before
I've checked Compressions all between 170/190
Best way I can describe it
Before I could balance a 20 p on the plenum but now it will topple over
Seems great at higher revs
Reg counter is constant at 600 RPM
I will check for Vacuum leaks next
 
1 - 3 of 3 Posts
Top