Vauxhall Owners Network Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
9,487 Posts
Discussion Starter #1
Hi folks,

I have a FC plug and the wires for it but the pins are not inserted into the plug, so, I need a pinout list for a FC, similar to this DID one Andy K has done :up:

Andy K said:
Pinout

Pin 1 +12v red
Pin 2 temp sensor blue/white
Pin 3 earth brown
Pin 4 illumination grey/black or grey/green
Pin 5 ignition black
Pin 7 temp sensor blue
Pin 12 speed MPH blue/red
Much appreciated.
 

·
Registered
Joined
·
9,487 Posts
Discussion Starter #2
ok well i found an old post by Ian, here are some of the pins:

Brown/Green = pin1 =common ground, poss switch pin 6
Brown/White = pin20 = button1, poss switch pin 4
Brown/Blue = pin 23 = button2, poss switch pin 3
Brown/Red = pin 22 = button3. poss switch pin 2
Brown/Black = pin5 = button4, poss switch pin 1

Problem is, it's all the other wires I don't know where to put!
 

·
Registered
Joined
·
9,487 Posts
Discussion Starter #4
Thanks to scharatz and Atlantean :beer:

Pin - Wire Colour

1 - Brown/Yellow
2 - Brown
5 - Brown/Black
6 - Red/White
9 - Brown/Red
10 - Brown/White
11 - Black
12 - Blue
13 - Blue/White
14 - Red
15 - Grey/Black
20 - Brown/White
21 - Blue/Red
22 - Brown/Red
23 - Brown/Blue
24 - Black/Brown
25 - Brown
26 - Blue/Black

Some of the colours are duplicated there, I'll look into it
 

·
Premium Member
Joined
·
6,551 Posts
cavtastic said:
Some of the colours are duplicated there, I'll look into it
They are. All the brown/something ones are duplicated.

You can imagine it was a ***** wiring in the switch this morning :rolleyes:
 

·
Registered
Joined
·
154 Posts
Few weeks ago i had same problem
This will solve your problem (maybe some colours are diferent from colours on your connector, because this is connector from opel vectra, but pin numbers are correct
1-brown/yellow-switch 6
2-brown-ground
3-/
4-/
5-brown/black-switch 1
6-red/white-ECU
7-/
8-blue/black-tank sender (with LCD instrument)
9-brown/red-diagnose pin D
10-brown/red-diagnose G
11-black-ignition
12-blue-temperature sensor
13-blue/white-temperature sensor
14-red-+
15-gray/black-illumination
16-/
17-/
18-/
19-/
20-brown/white-switch 4
21-blue/red-speed sensor
22-brown/red-switch 2
23-brown/blue-switch 3
24-black/brown-ECU
25-brown-ground
26-blue/black-tank sender (without LCD instrument)
 

·
Registered
Joined
·
9,487 Posts
Discussion Starter #8
thanks guys. :beer:

only difference from my connector to the pinouts here was that mine had brown/yellow as pin 3 :mmmm
 
1 - 8 of 8 Posts
Top