Vauxhall Owners Network Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter #1
Hello all.

I replaced the driver's door on my 1999 1.2L 16V Corsa B. My old door was a manual winding window. The new door has electric in it.

I connected the loom and put a 30amp fuse in slot 28 of my fuse board but it doesn't work.

Do I need additional wiring?
 

·
Well-known member
Joined
·
11,498 Posts
Do you actually have the wiring going to the door pillar socket where the door wiring plugs into?
 

·
Well-known member
Joined
·
11,498 Posts
That wasn't what I asked.
On my Corsa B there were terminals missing on the door pillar socket where the plug from the door loom plugs in. Only the GLS had electric windows from memory so the wiring is unlikely to be there in the dashboard loom.
 

·
Registered
Joined
·
18 Posts
Discussion Starter #5
Sorry, I must have misread.

I will need to check the wiring and if there is power at the fuse I fitted.

Guessing I will probably have to put my own wiring to it though..
 
1 - 5 of 5 Posts
Top