Vauxhall Owners Network Forum banner

1 - 13 of 13 Posts
G

·
are those the iridium ones?
Yep, been in my 20 psi holding calibra for 2 years now, not missed a beat, and pushed a 350Z along the Mway saturday, even with him messing about with that dropping gears nonsense ;)

The mighty JohnA of max-boost used BCPR7EIX on his let, same plug, just more expensive.
BCPR7EIX is made to jap standards and BKR is made to ISO (European) standards.
 

·
Registered
Joined
·
7,995 Posts
Discussion Starter · #6 ·
Yep, been in my 20 psi holding calibra for 2 years now, not missed a beat, and pushed a 350Z along the Mway saturday, even with him messing about with that dropping gears nonsense ;)
sounds good to me matey can i get these from a normal factors??

any idea on price?

got some denso iridium ones at the moment and they are well **** misfires bangs the lot:cry:
 
G

·
Remember you being recommended them...

www.sparkplugs.co.uk If in any doubt about these plugs, just ask. Very knowledgable.
John using them says it all though to be honest :beer:

Can't remember a price, up to £30 I think. To safeguard your engine it's a small price.
 

·
Registered
Joined
·
7,995 Posts
Discussion Starter · #8 ·
Remember you being recommended them...

www.sparkplugs.co.uk If in any doubt about these plugs, just ask. Very knowledgable.
John using them says it all though to be honest :beer:

Can't remember a price, up to £30 I think. To safeguard your engine it's a small price.
cheers mate will give them a go and see how i go:Cool2:
 

·
.
Joined
·
15,300 Posts
got some denso iridium ones at the moment and they are well **** misfires bangs the lot:cry:

How new is the dizzy/rotor arm?
Mine had a misfire that was solved by replacing them.
Do you use normal unleaded? That can cause it too
 

·
Registered
Joined
·
7,995 Posts
Discussion Starter · #10 ·
How new is the dizzy/rotor arm?
Mine had a misfire that was solved by replacing them.
Do you use normal unleaded? That can cause it too
new mate and i use optimax/V-power..:Cool2:
 

·
Registered
Joined
·
7,995 Posts
Discussion Starter · #11 ·
found out lead 2 was a bit dodgy in the end but sorted now ordered me some plugs callyt as they had none in stock
 
1 - 13 of 13 Posts
Top