Vauxhall Owners Network Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
318 Posts
Discussion Starter #3
would have to fart around drilling out the egr bracket holes then to fit a bigger bolt through, easier if more expensive to drop a new plenum on. Pluss less chance of buggering anything else up!!!
 

·
Premium Member
Joined
·
2,851 Posts
I haven't got any I'm afraid, but might be worth saying if it is the extended one you need...
 

·
Registered
Joined
·
318 Posts
Discussion Starter #9
OK, 1 M6 helicoil thread repair kit ordered! Well if it doesn't fix my problem at least I'll know the air leak isn't from the EGR and the bolts will tighten properly.
 

·
Premium Member
Joined
·
666 Posts
are you talking about the 3 bolts from the EGR arm to the plenum - sure they are M4 same thread as timing cover bolts / rocker cover bolts


Eighth_Dwarf said:
they don't need and would like to sell????

I think my problem ( http://www.vauxhallownersnetwork.co.uk/showthread.php?t=83206 )
may well be EGR related as the threads seem well and truly stripped and not tightening, so I think that is the source of my air leak.
 
1 - 14 of 14 Posts
Top