Vauxhall Owners Network Forum banner
1 - 20 of 25 Posts

·
Registered
Joined
·
243 Posts
Discussion Starter · #1 ·
2.0 diesel vectra parts for sale 1996-2002

Air Flow/Mass Meter £65... (1 year old original bosch part 0281002180 -3 year warranty £135 new)
EGR Manifold valve £35...(metal lid type)
EGR solenoid £30 each (GM part no 09128022) £95 from vauxhalls (vaccum solenoid)
Boost Pressure Solenoid £30
M.A.P Sensor £20 (bosch part no. 02810022137) cost new £57.
Central Locking all 5 doors £15 each
Vaccum Pump £20
SRi dials - odemeter/fuel/temp/(140k) £25
Diesel dials - odemeter/fuel/temp/ (130k) £25
Glow Plug ecu (GM part no. 09132691) £25
Air bag unit £15
Steering wheel controls £5
ABS wheel speed sensors (petrol & diesel Part no. 90464775) £7 each
Multi Timer Control Units (for indicators/rear heated screen & wipers Part no. 90506094) £10 each
Drivers door lock/boot lock and key £15
Electric mirror switches £5 each
air con/rear screen/alarm switches £3 each
electric window regulator/motor (drivers door) £15 driver door glass £10
 

·
Registered
Joined
·
243 Posts
Discussion Starter · #8 ·
Length of the valve....theres few mm difference so i dont think it will fully close might be wrong never tried... the metal lid type is the earlier 97/98/99/00 one its longer the metal lid type is shorter and a later normally on the 00/01/02 models, both types are the same on vectra/astra/zafrira 2.0 Di & DTi
 

·
Registered
Joined
·
6 Posts
Length of the valve....theres few mm difference so i dont think it will fully close might be wrong never tried... the metal lid type is the earlier 97/98/99/00 one its longer the metal lid type is shorter and a later normally on the 00/01/02 models, both types are the same on vectra/astra/zafrira 2.0 Di & DTi
my dti falls in the 2000 models so it could be any of the 2
 

·
Registered
Joined
·
243 Posts
Discussion Starter · #13 ·
have a look at yours you only have to take the eco-tec plastic cover off top of engine 3 torx screws can undo them with an 8mm spanner/socket... then underneath you will see the EGR manifold valve 2 torx screws holding it to the inlet manifold with a vac pipe going to the right of it
 
1 - 20 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top