Vauxhall Owners Network Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-3 of 3 Results
  1. Small/Medium Vauxhall Cars Area
    Driving down motorway this morning and zaf just dies, managed pull over and plug OpCom in and it wouldn't show fault codes. Popped bonnet and done visual check on plugs, disconnected crankshaft plug and checked is was secure as that's last thing I replaced. OpCom now showing the P0170 and P1600...
  2. Small/Medium Vauxhall Cars Area
    Hi all! I have a Opel Combo 2006 CDTI. Recently I replaced the air mass unit and got the engine warning light - not the one with the spanner, but the other one of a yellow engine. Tried resetting the ECU using OP-Com, and now the car won't start. The fault code is: Immobiliser not programmed...
  3. Small/Medium Vauxhall Cars Area
    My weekend task will be getting to grips with OPCOM on my daughter's 54 plate 1.6 design. Initially I thought I just had to clear the "spanner" light. She was 17 yesterday and wanted to go for a drive, all was good but a few stalls and car park figure of 8s for half an hour made the engine...
1-3 of 3 Results