Vauxhall Owners Network Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-6 of 6 Results
  1. Small/Medium Vauxhall Cars Area
    Can anyone help? I have a Vauxhall Astra 1.7 cdti 2012 diesel, which is running on 2 cylinders and is powerless. It started to mess around a little, and I thought it needed a run up the motorway to clear the emissions, but this did not happen as it lost all power and I had difficulty in getting...
  2. Car Audio / Electrical / Security / Diagnostic Rel
    Hi guys! After 2 years of collecting money for a car, I found and bought an 2007 G Astra 1.6 16v TwinPort, with the motorcode: Z16XEP20JV0226 for 1520€. (It has 235.000 km's on the clock) Rode about 400 km's with it when I had my appointment at my mechanic. Got a check engine light just before...
  3. Small/Medium Vauxhall Cars Area
    So, I've done around 15,000 since new clutch, csc / dmf, etc was fitted and bled it again after a clutch master cylinder change and car has been sweet for last 15,000. Jumps in this morning to pedal travelling halfway down and biting right at the floor. So basically drove it 30 miles using the...
  4. Small/Medium Vauxhall Cars Area
    Vauxhall Astra H (Mk5) 2006 1.6 Petrol - Twinport Z16XEP Hi, I come here tonight seeking help or two fronts. I have a P0170 engine running lean fault for the past 6 months. For the past few months the car really struggles in first gear (juddering). I have replaced air filter, oil and filter...
  5. Small/Medium Vauxhall Cars Area
    Edit: Thanks guys, for other visitors - it's not compatible :) Edit 2: Upon trying to replace the cylinder, I uncovered a myriad of other problems. I took the car into a mechanics and it turns out those cast cylinders ARE compatible. Tl;dr: Replacing brake cylinders, old one looks like this, I...
  6. Large Vauxhalls
    So I have felt that on low gears that there was a lack of power and with low revs it rumbles very heavy. Having a look around my engine I tried disconnecting the cylinder switches one by one whilst engine was running so I could hear if they worked.. 1 of the cylinders (second from left) made...
1-6 of 6 Results
Top