Vauxhall Owners Network Forum banner

Discussions Showcase Albums Media Media Comments Tags

1-6 of 6 Results
  1. Small/Medium Vauxhall Cars Area
    EDIT: updated corrected fault code. Hi All, I'm at my witts end with this and hoping there is someone out there that can advise! I drive a 2009 Astra H 1.4L, I bought it last September and have had issues since. When i bought it there were a couple of cam shafts in the boot which had been...
  2. Car Audio / Electrical / Security / Diagnostic Rel
    Hello i am looking for away to confirm a camshaft sensor is playing up. I know there are only 2 wires into the sensor. And all the sensor are the same part number. Are you able to swap the 2 around to see if the error occurs on another camshaft bank?
  3. Small/Medium Vauxhall Cars Area
    I have 2002 Astra 1.7 tdi ( the one with the Isuzu engine) I am trying to change the camshaft sensor but its up just below the starter motor and can’t seem to get to the bolt any advise what I could use and size would be much appreciated
  4. Car Audio / Electrical / Security / Diagnostic Rel
    Hi all, I've been carrying out plenty of work on my 2005 Meriva 1.4, and it's almost ready to send for its MOT but the dreaded check engine light has come on! Along with that is the amber car with the spanner symbol inside. I've used a code reader and its giving out the signals P0340 - cam...
  5. Small/Medium Vauxhall Cars Area
    I am new to working on my car and i have had a fault code regarding the camshaft position sensor, i am just wondering if someone could point me in the right direction in finding it. I have a 2007 1.8 SRi VVT can it be done without taking off the cambelt?
  6. Small/Medium Vauxhall Cars Area
    Hi. Hopefully someone will be able to help. My other half replaced the cam belt on my 2003 1.8 Zafira Elegance. He did all that correctly except when he put the camshaft position sensor back on the wire insulation was really brittle and fell off and then promptly shorted. Since then it has run...
1-6 of 6 Results
Top