Vauxhall Owners Network Forum banner

cam sensor

  1. [Insignia] [08-17] Not starting

    Cavalier, Calibra, Vectra, Signum, Sintra & Insign
    Hey again Insignia 2.0cdti 130 looking for some help after doing a full rebuild top to bottom after the dreaded oil seal failure everything is back together but car won't start. I can however start the car by removing the cam sensor and run a magnet over the sensor while the car is turning over...
  2. [Insignia] [08-17] Transponder issue?

    Cavalier, Calibra, Vectra, Signum, Sintra & Insign
    2010 Vauxhall Insignia Car is turning over but won’t start? When the key is turned the car turns over and goes through the motions but is missing that final kick to actually start up and stay running. Car is currently with a Vauxhall Dealership that cannot give me a definite answer as to why...
  3. [Vectra C] [02-08] Vectra 2.2 Z22YH P0341

    Cavalier, Calibra, Vectra, Signum, Sintra & Insign
    Hi guys, I'm getting a P0341 cam circuit fault code after installing new timing chains. The power and ground wires to the sensor are good with no drop outs. I'm getting nothing on the signal wire with the engine rotating, but am able to do a bypass and create a signal. It's as though there's...