1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.

  1. forestfan

    forestfan New Member

    Messages:
    7
    Likes Received:
    0
    Location:
    London UK
    I must be a real dunce.

    I can't find where to plug in my U480 car reader. Its not between the gear level and handbrake and I can't find the fusebox anywhere!
  2. whitebullet

    whitebullet Well-Known Member

    Messages:
    5,260
    Likes Received:
    45
    Location:
    STOKE
    Drives:
    Omega v6
    is it behind the ashtray?
  3. forestfan

    forestfan New Member

    Messages:
    7
    Likes Received:
    0
    Location:
    London UK
    Thanks for suggestion - this thing doesn't have an ashtray!

    I have a feeling it may be in the fusebox under the bonnet....
  4. pyro_maniac

    pyro_maniac New Member

    Messages:
    60
    Likes Received:
    0
    Location:
    south ockendon
    in front of the handbrake there is a little cubby hole under the gearstick
    give that a tug and its behind there
  5. forestfan

    forestfan New Member

    Messages:
    7
    Likes Received:
    0
    Location:
    London UK
    Well I think that would be logical, there is a cubby hole with a circular hole you can just get your finger into, but it doesn't budge. This dash is built like a brick.

    Oh well. I found out that if you turn on the ignition whilst the brake and accelerator are depressed the DTC flashes up in the milometer. Its a ECN 242F75. I think thats some diesel sensor (ECN 242F75---P242F Partikelfilter Druck Sensor nicht im Sollbereich B-030).

    Thanks all for your help, by the way(y)
  6. Hiddenvision

    Hiddenvision Member

    Messages:
    73
    Likes Received:
    0
    Location:
    London
    Connector is located under the Handbrake void.
    Just give the handbrake boot a little tug and that will come off.
    Then just lift the flap.
    Simples......


    Hv.
  7. forestfan

    forestfan New Member

    Messages:
    7
    Likes Received:
    0
    Location:
    London UK
    There is no handbrake boot - its one of those large lever kind of handbrakes.
    Basically there are only 2 places in the cabin that are feasible: the first is below the handbrake - but all there is there is what looks like a handbrake adjustment screw. The second is a meaningless looking cubby hole below the gear lever which seems to have nothing that can move. I really wonder if its is in the engine compartment...
  8. pyro_maniac

    pyro_maniac New Member

    Messages:
    60
    Likes Received:
    0
    Location:
    south ockendon
    have a look in your manual mate, it shows you were it is there
  9. Dynamic Dave

    Dynamic Dave Qualified lego bricklayer

    Messages:
    9,181
    Likes Received:
    4
    Location:
    Oxfordshire
    A picture paints a 1000 words - just to the right of the yellow arrow in the 2nd picture.

    [​IMG]
  10. forestfan

    forestfan New Member

    Messages:
    7
    Likes Received:
    0
    Location:
    London UK

Share This Page