1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
    Dismiss Notice
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.
    Dismiss Notice

Vectra side mirror housing broken in carwash

Discussion in 'Other Car/Van Related Technical Information Required / Provided' started by SkyB, Jun 17, 2017.

  1. SkyB

    SkyB New Member

    Messages:
    3
    Likes Received:
    0
    Both mirror housings were pulled out of their proper positions by a carwash. Never used one before, and now never again. Of course it's 'not their problem'. So does anyone know how I push them back up and back in? At the moment they're hanging at the maximum I could get them to go without going too far and possibly snapping it altogether. The electrics still work and the glass is fine, but the car's now unroadworthy as I can't see my mirrors. The car's a Vectra 2000. Great car, very very expensive repairs.
     
  2. SkyB

    SkyB New Member

    Messages:
    3
    Likes Received:
    0
    Sorry Holden, learning how to post in the forum. Not very clear instructions.
     

Share This Page