1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
    Dismiss Notice
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.
    Dismiss Notice

Vectra 1.9CDTI Fault Code P1109

Discussion in 'Cavalier, Calibra, Vectra, Signum, Sintra & Insignia owners forum' started by PIBudd, Apr 25, 2007.

  1. PIBudd

    PIBudd New Member

    Likes Received:
    Does anyone have any info on this please?
    55 reg 1,9CDTI SRI Diesel Vectra.
    Light with spanner comes on and turbo stops working and no power!!!
    When to vauxhall dealer who gave me this fault code.
    P1109 Swirl Activator.
    He then says we will book you in (2 weeks wait)
    I then start the engine and the light has gone out but a new one has now lit in the bottom right hand corner of the dash.
    This new light in the book says "exhaust gas levels are incorrect.

    The (Trainee Vauxhall Guy) says its ok to drive the car with this fault for 2 weeks.

    Any Advice/Ideas?


    UPDATE : 4/05/07 (changed the air filter) even though i just had a service the air filter was not changed. Vauxhall only say to change this every 4 years !!!.
    Opened up the casing it was blocked with loads of leaves and the filter was full of black dust and well blocked.
    No immediate change but after a day of driving on "get you home mode" with engine management light on. On the 2nd day the light went off power returned and not had the issue since. (touch wood)

Share This Page