1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.

[Frontera] please help with my frontera alarm im going mad

Discussion in 'Antara, Brava, Frontera, Mokka & Monterey owners forum' started by bigals2012, Apr 5, 2012.

  1. bigals2012

    bigals2012 New Member

    Messages:
    7
    Likes Received:
    4
    Drives:
    1995 frontera sport
    please can anyone help...with my frontera alarm ..its driving me nuts:(
    right were do i start..its a 1995 n reg ,swb,2.0 sport
    and the alarm just keeps going off,imbolizer is fine ,and it fires up fine,when i swipe the fob
    the problem that i keep getting ,is the alarm went off,and wouldnt turn off till i swiped the imbolizer fob,but then the drivers side indicaters,stayed on.they dont flash just stay on,i tryed disconecting the battrey.but when i connect it back up ,the indicaters just stay on again,it only does it on the drivers side
    the passangers side seems fine..please help any advice ,would be greatlly aprcaited
    (n)
  2. fronteratech

    fronteratech VXON Resident 4x4 and diesel specialist

    Messages:
    7,464
    Likes Received:
    454
    Location:
    manchester gt manchester
    Drives:
    Frontera
    sticking relay in the alarm controller suitable bang on the dash above glovebox, also the door switches need adjusting
  3. bigals2012

    bigals2012 New Member

    Messages:
    7
    Likes Received:
    4
    Drives:
    1995 frontera sport
    hi ive took the little silver box out from under the glove box,and gave it a tap,that seems to be the problem with the indicaters,staying on thanks,but the alarm still seems to just go off for no reason,ive looked at the door swichs and they seem to be fine,do you know any way i could just disconect the alarm compleatley,untill i get a decent aftermarket one fitted
    many thanks
    fronteraorg likes this.
  4. fronteratech

    fronteratech VXON Resident 4x4 and diesel specialist

    Messages:
    7,464
    Likes Received:
    454
    Location:
    manchester gt manchester
    Drives:
    Frontera
    check all your door switches if you slide them back just check the contact makes properley a little tap from driver on contact near securing screw help to move contact slightly forward to sliding part getting better connection
  5. fronteratech

    fronteratech VXON Resident 4x4 and diesel specialist

    Messages:
    7,464
    Likes Received:
    454
    Location:
    manchester gt manchester
    Drives:
    Frontera
    if you disconnect it your car will not start immobiliser system workd through it
  6. bigals2012

    bigals2012 New Member

    Messages:
    7
    Likes Received:
    4
    Drives:
    1995 frontera sport
    done all door switchs,and all was fine untill last early hours,when the alarm went off for no reason,so went out reset it then it went off 20 minutes laters?(n)
    i understand it wont start with the silver box disconected,but is there any other way of disconecting the alarm,as its driving me nuts..thanks for all the advice
  7. fronteratech

    fronteratech VXON Resident 4x4 and diesel specialist

    Messages:
    7,464
    Likes Received:
    454
    Location:
    manchester gt manchester
    Drives:
    Frontera
    have you tried pressing button on the internal senors before locking disables the internal sensors press button should flash led
  8. bigals2012

    bigals2012 New Member

    Messages:
    7
    Likes Received:
    4
    Drives:
    1995 frontera sport
    no i anit tryed that,i never even knew they had a button(n)
    thanks for that i will give it a try and let you know how i get on(y)
  9. fronteratech

    fronteratech VXON Resident 4x4 and diesel specialist

    Messages:
    7,464
    Likes Received:
    454
    Location:
    manchester gt manchester
    Drives:
    Frontera
    it disables the parametric sensors are you sure door switches are ok one under the bonnet as well
    bigals2012 likes this.
  10. bigals2012

    bigals2012 New Member

    Messages:
    7
    Likes Received:
    4
    Drives:
    1995 frontera sport
    hi thanks for all your help ,i think with the advice you gave me,ive finally cracked it,i pressed the button on the sensor ,like you said,the other flashed ,locked it up and all seems to be fine,up to now ..(y),will i need to press the sensor button every time ,i get out and lock it up,or will the sensors stay off all the time now,till i press the button again??also i still keep getting the reley still sticking on ,in the alarm box,which makes the indicater stay on,but with a gentle tap it goes off ,so not major,but was wondering am i able to buy a replacement alarm box,to cure this for good,if so do you know how much it would cost,and were i can get one from ,,or do you have any more top tips that will help..many thanks:)
    fronteraorg likes this.

Share This Page