1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.

[Zafira B] [05---] p1113 actuator position sensor?

Discussion in 'Astra, Corsa, Zafira, Meriva, Adam, Agila, Tigra & Nova [Includes AstraVan & ComboVan] owners forum' started by Tecnobaz, May 26, 2012.

  1. Tecnobaz

    Tecnobaz Member

    Messages:
    70
    Likes Received:
    1
    Location:
    LINCS UK
    Hi using Vauxcheck I read the codes p1113 actuator position sensor, Google search brings this code up as port deactivation position sensor is this 1 in the same?

    The second code is p0325 knock sensor, I'm thinking that the other causes this one would that be right?

    It also worth saying that when the spanner light comes on the car runs with less power and not smooth but as soon as you stop and restart the engine the light is off and it runs perfectly again.

    Since this problem started I can hear a whistle during parts of the rev range acceleration.

    Bazza
     
  2. marks152

    marks152 Well-Known Member

    Messages:
    9,686
    Likes Received:
    784
    Location:
    liverpool, uk
    9/10 times the knock sensor code is if the cars ever ran low on oil. Check oil levels. From the codes im assuming Z16XEP engine. Is this correct
     
  3. Tecnobaz

    Tecnobaz Member

    Messages:
    70
    Likes Received:
    1
    Location:
    LINCS UK
    Sorry, yes this is the 1.6
    Oil level is spot on.
     
  4. marks152

    marks152 Well-Known Member

    Messages:
    9,686
    Likes Received:
    784
    Location:
    liverpool, uk
    Do you have any further information about 1113 such as high/low voltage
     
  5. Tecnobaz

    Tecnobaz Member

    Messages:
    70
    Likes Received:
    1
    Location:
    LINCS UK
    the full description says p1113 actuator position sensor circuit malfunction. No mention as to high/low
     
  6. Tecnobaz

    Tecnobaz Member

    Messages:
    70
    Likes Received:
    1
    Location:
    LINCS UK
    This fault went away for a while but today its back.
    Engine Z16XEP0

    P1113 Intake Manifold air control actuator/intake manifold air control actuator position sensor - circuit malfunction
     
  7. Tecnobaz

    Tecnobaz Member

    Messages:
    70
    Likes Received:
    1
    Location:
    LINCS UK
    Took the plunge and took the car to the vauxhall, Its now having a new inlet manifold as this is the only way to correct the P1113 error.
    Lucky for me the warranty will cover most of the charges, but not all mainly due to the fact they have a cap on the labour rate of £40 per hour.
     

Share This Page