1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.

  1. andyh2k7

    andyh2k7 New Member

    Messages:
    3
    Likes Received:
    0
    Location:
    gosport
    hey does any body now how to take off the heater control panel on a corsa b because the bulb has blow from behind and i cant see any thing:cry: . so i dont know wot im pressing?
  2. phil w

    phil w VxON Member VxON Club Member

    Messages:
    684
    Likes Received:
    15
    Location:
    lincs
    Drives:
    Astra G saloon
    Take a look in the how2 section im sure there is a detailed description for the heater control panel and how to remove it
  3. andyh2k7

    andyh2k7 New Member

    Messages:
    3
    Likes Received:
    0
    Location:
    gosport
    corsa b heater control panel

    i tryed mate couldent find one for corsa b. thanks for replying(y)
  4. phil w

    phil w VxON Member VxON Club Member

    Messages:
    684
    Likes Received:
    15
    Location:
    lincs
    Drives:
    Astra G saloon
    Ok there are 2 screws behind the heater slide control this panel is a push fit , there are another 2 screws behind the 2 centre vents , to get to these roll the vents down as far as they will go and get a small electrical screw driver at the top of the vent apply a little downwards presure at the same time as pushing the vent downwards and it will click and gown down about another 30mm and in the top corners you will see 1 screw behind each vent , now the display on the top of the panel is free and you will also be able to move the panel towards you although the control cables are still attached , there will be enough room to acsess the bulbs if you cant you will have to undo the screws holding switch panel to the panel facia
  5. andyh2k7

    andyh2k7 New Member

    Messages:
    3
    Likes Received:
    0
    Location:
    gosport
    ok thanks mate

    ok thanks for ya help mate:cool:
  6. Dynamic Dave

    Dynamic Dave Qualified lego bricklayer

    Messages:
    9,181
    Likes Received:
    4
    Location:
    Oxfordshire

Share This Page