1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
    Dismiss Notice
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.
    Dismiss Notice

  1. Astrawoman

    Astrawoman New Member

    Likes Received:
    :D Hiya

    Does any 1 know the following torque settings for a Astra,1999,1.8,petrol,sport (engine Ecotech X18XE)

    Head Bolt Torque

    Camshaft Wheel Torque

    Camshaft bearing Cap Torque

    Crank Shaft Pulley Bolt Torque

    Many thanks!
  2. Ruperts Trooper

    Ruperts Trooper Geriatric petrol-head

    Likes Received:
    You've quoted the wrong engine code - 1999 Astra 1.8 uses the X18XE1 - the X18XE is an completely different engine.

    Head bolts (angle-tighten) - stage 1 25Nm - stage 2 90 degrees - stage 3 90 degrees - stage 4 45 degrees
    Camshaft Sprocket 8Nm
    Camshaft Bearing Cap 8Nm
    Crankshaft Pulley Bolt (angle-tighten) - stage 1 95Nm - stage 2 30 degrees - stage 3 15 degrees

Share This Page