1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
    Dismiss Notice
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.
    Dismiss Notice

[Astra Mk5/H] [04-09] Astra 1.9 ctdti engine managemnet light fault code p1109 and p1110

Discussion in 'Astra, Corsa, Zafira, Meriva, Adam, Cascada, Agila, Viva, Tigra & Nova [Includes AstraVan & Combo Van] owners forum' started by Robbo001, May 25, 2011.

  1. Robbo001

    Robbo001 New Member

    Likes Received:
    North Wales
    Hi all.
    I have an Astra 1.9 cdti sri with engine management light coming on. Diagnostic was carried out on the car with fault codes p1110 and p1109. I believe this to be a problem with intake manifold air circuit actuator.
    I then had a look in the engine bay where i spotted that the link arm between the four swirl control had disconnected. I reconnected the arm but the problem persisted making me believe that it's a problem with the actuator itself.
    Vauxhall seem to suggest that I need to replace the inlet manifold as there is a modification, plus the actuator to eradicate the problem. Meaning big cost i bet.
    Any advice? would it be possible for me replace this part myself ? any special tools required? Or would it be possible to just replace the intake manifold air control actuator plus the link arm? Help would be much appreciated.

Share This Page