PDA

View Full Version : bargains and quality parts



te17
22-05-2006, 10:29 PM
http://i8.photobucket.com/albums/a38/te1700/DSC00313.jpg
http://i8.photobucket.com/albums/a38/te1700/DSC00312.jpg
http://i8.photobucket.com/albums/a38/te1700/DSC00311.jpg
http://i8.photobucket.com/albums/a38/te1700/DSC00310.jpg
http://i8.photobucket.com/albums/a38/te1700/DSC00224.jpg
right i need these gone so £200.00 losing out big time :(
ripspeed oscars pcd 100 /106 offset of et42 runn on my car which is lowered not far off the bumpstops and didn't rub at all ,, just had all wheels balanced all were fine two tyres will need replacing soon ish due to inner edger camber wear ,, rear aren't far off being new ,,
c20xe airflow meters both in good working order bought the second one thinking first was faulty but was the loom at fault instead 15.00 each
288 front pads brand spanking new made by apecs 20.00 never seen a car in there life still shiney lol
2ltr front legs with couple of months old bearings in them and a good pair of std shocks if needed 40.00
rear 2ltr disk setup with good pads shoes new disks and bearings 40.00
four five stud steelies all with really good tyres 30.00 al straight and balanced
new xe thermostat 10.00 with housing
new bosch xe alternator 25.00 very little used few weeks of use tops engine died on me
nikkai 300watts inverter 15.00 never used

Brian Stirrup
23-05-2006, 05:07 PM
Are the airflow meters 4 pin or 6 pin?