PDA

View Full Version : Montego Wheel offset.

MadOnVaux!
30-11-2002, 12:30 PM
Does anyone know the offset for montegos?? As there is one sat up at my scrappy with 17" gold qualifiers(or similar),and was wondering if it would be feasible to,you know,codge them up on to mine with the help of spacers or summat.
I may get em cheap see.
MadOnVaux!
30-11-2002, 11:50 PM
Anyone???
I believe the PCD is different anyway,so its probably a no-no......
shame really as they are mint and look gorgeous IMO!
Cav3Kim
01-12-2002, 12:07 AM
Steve Tynan had a Cav3 with Montego ewheels on, so the PCD must be close, it's the offset that'll be hugely lower
Mark T
01-12-2002, 12:43 AM
Rover 200, 400, 25, 45
PCD 4 x 100
ET 35...38
Hub 56.0

Guess montego is the same
MadOnVaux!
01-12-2002, 02:43 PM
If the offset is 35-38,i could get some 10mm spacers and they would fit???
Dont shout at me if this is a thicko reply??:O
Carl Davey
01-12-2002, 11:00 PM
Spacers would make things worse if the offset is too low.

Lower offset = wheels further away from the centre of the car.

Low offset + spacers = even worse.
MadOnVaux!
01-12-2002, 11:39 PM
See,I am a FICKO!.........Sorry!:O
Cav3Kim
02-12-2002, 07:53 AM
38mm should be ok, it'll only widen your track by 22mm which is chuff all really, and if you're running wide tyres then it'll have tramlined anyway, I'm going to go for et41 when I get a chance since I think that et49 looks like the wheels are too far into the arch. Mad, you can but try my friend.
MadOnVaux!
02-12-2002, 04:41 PM
It could be all in vane as im not going to be able to get up there until next sunday,at which point they probably will have gone......
Some crusty old gimp was eyeing them up on saturday and talking to the scrappy owner about the possibility of fitting them to his.............





















..........MG MONTEGO TURBO!........Silly old fool,I bet he nearly craps himself when he hits the go pedal!
Yelloperil
23-01-2005, 10:20 PM
Be carefull coz montego's pre ROVER ie had silly imperila sizes! (95mmx4 PCD for all Maestro and Montego) thats anything upto h'reg (or with austin on the front grill)

If its a rover nodelthink G reg up were Rover therefore should be PCD 4 x 100
ET 35...38
Hub 56.0
MadOnVaux!
25-01-2005, 04:18 PM
Be carefull coz montego's pre ROVER ie had silly imperila sizes! (95mmx4 PCD for all Maestro and Montego) thats anything upto h'reg (or with austin on the front grill)

If its a rover nodelthink G reg up were Rover therefore should be PCD 4 x 100
ET 35...38
Hub 56.0

err, yes thanks....

This thread is over 2 years old now my freind! :shake
Dunc
25-01-2005, 04:23 PM
Guess ya didn't get them then MOV ;)
MadOnVaux!
25-01-2005, 04:30 PM
Guess ya didn't get them then MOV ;)

Funnily enough, No :lmao:

Why do people dig these threads up?
Dunc
25-01-2005, 04:33 PM
How do they find them, thats why i wanna know, takes some SERIOUS digging i reckon?!