Total Vauxhall Rolling Road Shoot Out Tables

[Dunc]

So, who after getting their figures reckons they'll make the rolling road shoot out tables?

[Snail]

if there was a wooden spoon shoot out, i`ll be in with a shot

[broster]

i think i may make the 1.6 tables.......

[Dunc]

i think i may make the 1.6 tables.......
Im not sure, you may only be ~50hp up on the rest ;)

[broster]

haha, yep apperently so...... how very cool

[Dunc]

haha, yep apperently so...... how very cool
Yeah, was a little suprised at that to be honest, guess people take easy route of modding 2.0 XE's or turbos?? Good to see someone doing something different and doing it PROPERLY.

[wotsthestory]

erm not likely I'll make the tables ......

[broster]

so many people think the 2ltr is the better option in the corsa or nova, however as you can tell myself and jamie disagree!

the ammount of times im told a 2ltr is the earier better option bores me lol! i personally think i will be alot faster than one! and the extra weight of the 2ltr isn't going to help go round a corner

[Dest]

Yep, I said to Jamie on Saturday I need to put my engine in a smaller car, his reply was "no, you need a smaller lighter engine that runs just as much power as a 2 litre!"

[broster]

indeed, i have spend enought on mine to have a 2ltr turbo fitted that would have been rebuild and not standard.

[Dest]

Have you run it at Pod yet?
What is the traction like in first and second?

[Dan Gliballs]

How much lighter IS the 1.6 16v lump than an 20XE/LET out of interest? :)

[broster]

i have run it at the pod, spins alot in first and second..... can control it tho which is good, the ecu has launch control buit into it just needs setting up.

from what i can work out from people who have weighed it they say 8 stone..... having lifted both of them up is say it sounds right.... thats the engine and box.

[ADA-V]

wel, i dont like it.
i think its poo
slow
and ugly








and yes, i am fekkin jelous. lmfao;)

[TheMorphiuz]

If I get on any list, even if it's the list of people who ran on Saturday... I'll be holding it up! :lmao:

[broster]

wel, i dont like it.
i think its poo
slow
and ugly








and yes, i am fekkin jelous. lmfao;)


hahaha! love it

[spesh]

broster - your car is fkin magic, i love it :) The sound is just so 'right'

[broster]

oh you guys! you make me blush!

[Dunc]

Pfffffft, this was SUPPOSED to be a thread of everyone saying i'd be 2nd/3rd in the 2.1-2.5 section and that my car is great and everyone loves ME, not a chum up to Broster thread :p (nice car btw ;) Remember seeing it when i had my car mapped there :up:)

[broster]

you would have seen it in an engine less state then yes? looking tatty with no rear spoiler

[Dunc]

Erm, nope, it had an engine, think it was JUST about to ahve some work done to it, was up on one of the ramps whilst wayne was doing my car. Did note the rachet strap going from one end to the other underneath though ;)

[broster]

just trying to work out when this was, could have been the oil pump change, or clutch or starter motor........

[Dunc]

Beginning of Feb, 3rd i THINK.

[Andy_H]

So, who after getting their figures reckons they'll make the rolling road shoot out tables?

Had a quick look at the tables yesterday and I think yours will easily make it onto the V6 table Dunc... and that crazy 1.6 TB'd Corsa should top the under 1800 N/A table. I think that's about it though :shame:

[Dan Gliballs]

Ahh, but what about the 1.4 table.

[Dunc]

Shame neither Dest nor Dangli made the tubby list think Dangli would've needed another 7bhp to even make bottom of their list!?

[Dan Gliballs]

Shame neither Dest nor Dangli made the tubby list think Dangli would've needed another 7bhp to even make bottom of their list!?

Yup :( Wonder how many on that table were tested at Well Lane though :lmao:

Try again next year with hybrid turbo, Phase 3, and a smidge of Nos.

[Dest]

Yep, I knew I should of given it that extra turn or two :(

[Dunc]

Come on boys, if i can make the table, anyone can ;)

[ADA-V]

Come on boys, if i can make the table, anyone can ;)


the dinner table??

make sure theres room for me big boy. ;)

[Reverb]

I'm 7hp short of the bottom. :( Never mind - I've made my mind up to get Jamie to map the ecu. It needs doing and it might as well be done well.

[WBC]

Yup :( Wonder how many on that table were tested at Well Lane though

Try again next year with hybrid turbo, Phase 3, and a smidge of Nos.


Well i take it youve seen some pics from yesterday then???

Fookin ell did everyone jump :)
Everyone ran out the garage cept me :(,,, I ran to the back of the garage

Anyways, it hit 366bhp then it went bang :)
WAZPAZ hit a healthy figure of 326bhp too:Cool2:
I got 224 after a half turn and a new amahl valve ;)

[Dan Gliballs]

Well i take it youve seen some pics from yesterday then???

Fookin ell did everyone jump :)
Everyone ran out the garage cept me :(,,, I ran to the back of the garage

Anyways, it hit 366bhp then it went bang :)
WAZPAZ hit a healthy figure of 326bhp too:Cool2:
I got 224 after a half turn and a new amahl valve ;)

Yeah, just read the thread over on Mig :eh

[goonas]

I'm 7hp short of the bottom. :( Never mind - I've made my mind up to get Jamie to map the ecu. It needs doing and it might as well be done well.

I am 2 short :( - hopefully back to normal once I have had the vacum leak sorted!

Nice choice BTW about the mapping.... 2 of the 3 highest V6's had been mapped by them ;)

[Reverb]

I got some stuff to sell and that should get me the 400 quid (still got the 250 for torquemada wheels too). Should be soon if I can get the things on ebay tonight!

[Mark T]

Mine should still make the 2.5-3.0 NA category.

[Reverb]

Mine should still make the 2.5-3.0 NA category.

Where you there mark? Hell, i would have come up and shook your hand if i knew!

[Mark T]

Nah, got mine done locally.

[adymorris]

So, who after getting their figures reckons they'll make the rolling road shoot out tables?


I'm just thankfull mine got off the feckin rollers under it's own power :eh

[DanBoy]

I'm just thankfull mine got off the feckin rollers under it's own power :eh

I thought the GSI you bought was meant to have 170bhp?

[adymorris]

I thought the GSI you bought was meant to have 170bhp?


funny that.....so did I

may be due to two mechanics not sitting on the bonnet NOT !!! :cry:

[Dan Gliballs]

funny that.....so did I

may be due to two mechanics not sitting on the bonnet NOT !!! :cry:

Well I DID question this very point in Dr Watson's for sale thread.

[adymorris]

Well I DID question this very point in Dr Watson's for sale thread.


It has
powercap
superchip
induction kit
fse fuel regulator
4-1 manifold
stainless exhaust

O yeh and standard output !!!!

Either need setting up or engine is fecked, putting out low power and all the mods are brining it up to standard

[Laura H]

well u beat me :lmao: even if my timing is out..
going back to the rolling road tomorrow to see what went wrong..:Cool2:

[Dan Gliballs]

It has
powercap
superchip
induction kit
fse fuel regulator
4-1 manifold
stainless exhaust

O yeh and standard output !!!!

Either need setting up or engine is fecked, putting out low power and all the mods are brining it up to standard

Amongst all that, the word 'Regal' WAS mentioned, let's not forget!!

[TheMorphiuz]

Amongst all that, the word 'Regal' WAS mentioned, let's not forget!!

That explains everything! FPMSL!

Take her back to Jamsport and get Jamie to work his magic! :cool:

I've heard good things about V-Tuning 2!

[adymorris]

Amongst all that, the word 'Regal' WAS mentioned, let's not forget!!


did you say regal or reamed !!!!

[Laura H]

well took the car back to engine advantages today and the car read 164.6bhp abd the same lbft as before 166.1.............

i had put a thread in comunity to discuss

[K-Lone]

i had put a thread in comunity to discuss

Can't see it .

[adymorris]

Amongst all that, the word 'Regal' WAS mentioned, let's not forget!!


what is the score with Regal then, is it one to avoid, not that I'm going to drive all the way down to plymouth or portsmouth - wherever they are ?

[carlos]

Can't see it .

http://www.vauxhallownersnetwork.co.uk/showthread.php?t=84889

;)