PDA

View Full Version : 308mm Brake Set up


norm_gsi16v
24-03-2006, 09:25 AM
Parts Seperate

308mm vectra gsi brackets £37.00 pair
(£8 delivery) 2-3 working days
(£19.50) nxt day
http://i2.photobucket.com/albums/y28/normcoupeturbo/i1picture078.jpg

308mm plain front vauxhall discs £70.00
(£8 delivery) 2-3 working days
(£19.50) nxt day
http://i2.photobucket.com/albums/y28/normcoupeturbo/Picture090.jpg

308mm grooved front saab viggen discs £90.00
(£8 delivery) 2-3 working days
(£19.50) nxt day


Police spec front pads £23.00 a Set
(£8 Delivery) 2-3 working days
(£19.50) nxt day
http://i2.photobucket.com/albums/y28/normcoupeturbo/Picture004.jpg

Full Kit Prices

Plain kit £130
(£24 delivery) 2-3 working days
(£58.50) nxt day

Grooved kit £150
(£24 delivery) 2-3 working days
(£58.50) nxt day


please pm me for details as i do get busy and dont get much time to read the thread ALL pms will be replied to

Now using dhl insteed of royal snail due to problems with them

Delivery stated is from cleared payment and stock availablity

baxter
25-03-2006, 06:30 PM
you have a pm!

are they 4 or 5 stud?

norm_gsi16v
25-03-2006, 06:31 PM
you have a pm!

are they 4 or 5 stud?

they are 5 stud jus pmed u back lol :bananasmi

CavHopper
25-03-2006, 06:34 PM
How many sets have you got matey? Plenty?

baxter
25-03-2006, 06:34 PM
they are 5 stud
:shame:

norm_gsi16v
25-03-2006, 06:35 PM
got a shed load comming for the middle of the week :Cool2:

CavHopper
25-03-2006, 06:39 PM
OK, interested and waiting eagerly for pics of the drilled/grooved discs :up:

Can you use the 288mm calipers then?

norm_gsi16v
25-03-2006, 06:42 PM
Can you use the 288mm calipers then?


yep you can make slife easier no bleeding of the system :Cool2:

CavHopper
25-03-2006, 06:47 PM
Right cool, if I buy the V6 I'm going to view tomorrow, I'll have a set with the saab discs(pending pics)

spesh
25-03-2006, 07:56 PM
if i wanted to use these discs on a 4stud setup then is it just a case of getting them drilled out to 4?

norm_gsi16v
26-03-2006, 09:58 AM
yes thats right im looking for a template so i can do them but havent yet got 1

spesh
26-03-2006, 10:52 AM
no need for spigots or what not?

and can you supply the calipers too? you could be on to a nice little winner here fella ;)

Mark T
26-03-2006, 11:58 AM
you will need spiggot rings, as the 4 stud hubs are smaller

Mark
26-03-2006, 12:43 PM
What would be the smallest wheel these 308's will fit behind?

Mark T
26-03-2006, 01:02 PM
16s, depending on the clearance.

Turbo 16s just clear them

CavHopper
26-03-2006, 03:11 PM
Right cool, if I buy the V6 I'm going to view tomorrow, I'll have a set with the saab discs(pending pics)
Bought the car but it has drilled/grooved jobbies already, so will not be needing these bud:Cool2:

spesh
26-03-2006, 09:27 PM
you will need spiggot rings, as the 4 stud hubs are smaller

Thanks Mark! :)

Does anyone know if you can buy the rings anywhere?

edit - j1400 on migweb sells the spigots for a tenner..

vauxmaster
26-03-2006, 09:32 PM
Thanks Mark! :)

Does anyone know if you can buy the rings anywhere?Tom Stickland on MiG was selling them, as well as afew other ppl.

:Cool2:

TURBOPOWER
27-03-2006, 10:49 PM
Heres a link to some viggen discs on ebay just so peeps can see what they look like, should be the ones:Cool2:

http://cgi.ebay.co.uk/SAAB-9-3-VIGGEN-9-5-AERO-Drilled-Grooved-Brake-Discs_W0QQitemZ8050205730QQcategoryZ23013QQrdZ1QQc mdZViewItem

norm_gsi16v
28-03-2006, 06:54 AM
they are cheap copies not gen saab but u sorta get the idea

goonas
10-04-2006, 09:32 PM
** This thread is closed, until disputes on another forum have all been cleared up **