Cav V6 bit clearout

[Jon Mc V6`]

These are the bits and pieces I have left with starting prices.

Water Pump, 18 months old - £15
Cat - £50
spare wheel (With 205/50x15 tyre) - £15
Fan - £20
Washer bottle incl motor - £10
Idle control valve - £25
Various standard relays – ask
Heater motor - £15
Full set of door locks with central locking motors - £30
Plug leads, 12 months old genuine Vaux, cost £180 - £50
Engine cover, red centre cap will be primed ready to be colour coded - £20
Electric sunroof conversion (flatted and primed roof panel ready for colour coding) - £20
Throttle Cable - £5
ABS ECU Module - £25
Fuel rail and injectors - £20
Custom door pockets (to fit 6 ½ “ speakers) with kerb light lenses (but no lights) - £30 need to be flatted and painted or covered.
Locking fuel cap - £5 (may suit other vauxhalls)
Boot locking motor - £5
Fuel flap locking motor - £5
Clutch cable - £5
Starter Motor - £25
Steering rack (power steering) - £30
Quad 5" exhaust, not a direct replacement but fits onto standard centre pipe, requires spare wheel well cutting out and new hangars fitting - £200
Bonnet with flush evo vent and fibreglass badyboy, requires sanding and painting - £50, pick up only

All item are plus postage, but I am open to offers so please feel free to make sensible ones and ask for more info on specific bits. I can provide pics on request. I am still breaking the engine and sorting out the bits in the garage so I’ll add/remove bits as appropriate.

[Jon Mc V6`]

Bump

[Jon Mc V6`]

Up we go

[Jon Mc V6`]

Bump

[Jon Mc V6`]

Bttt

[Jon Mc V6`]

Open to offers

[Jon Mc V6`]

Bump

[Dunc]

I know you've not got the rocker covers with the heads, have you got them at all?

[Jon Mc V6`]

I know you've not got the rocker covers with the heads, have you got them at all?

Sorry, dunc the rocker covers have been snapped up:shame:

[Jon Mc V6`]

Bump

[chris.s.j.todd]

hi, intrested in Electric sunroof conversion (flatted and primed roof panel ready for colour coding) - £20 + Bonnet with flush evo vent and fibreglass badyboy, requires sanding and painting - £50, pick up only

would need it posted though, may be able to arrange courier to collect if pos.

[shrink]

still cant beleive no ones taken that exhaust yet :)

its kinda funky.... if it hadnt been a hatchback one id have been tempted.

[Jon Mc V6`]

hi, intrested in Electric sunroof conversion (flatted and primed roof panel ready for colour coding) - £20 + Bonnet with flush evo vent and fibreglass badyboy, requires sanding and painting - £50, pick up only

would need it posted though, may be able to arrange courier to collect if pos.

I can get you weights and dims if you want to arrange a courier, I'm fairly tight about when it can be picked up as the wife is away next week so I'll need to make arrangement to be at home. I'll post up the info tonight after I get home and weigh it.:Cool2:

[Jon Mc V6`]

Bump

[V6 Masochist]

Hi, just joined the forum after searching for Cav/Cal V6 parts. I'm interested in the cylinder heads as my Calibra has dodgy valves on one cylinder. Also will you have an F25 gearbox eventually? The one on my Cav has just gone! (If I had a 3rd car I could take the good gearbox off the bad engine and put it on the good one....but I haven't!)

Unfortunately I'm way away from you on the south coast, so the cylinder heads would have to be couriered.

Nige

[Jon Mc V6`]

I can get you weights and dims if you want to arrange a courier, I'm fairly tight about when it can be picked up as the wife is away next week so I'll need to make arrangement to be at home. I'll post up the info tonight after I get home and weigh it.

Okay, dims 135 x 125 x 10 cm, weight 15kg.

Just so you know what you're getting, one metal cav bonnet with a lexmaul fibreglass badboy blended in. A fibreglass Evo 6 vent flushed in and a vent cut out above the air filter. It has a chrome catch and bonnet spring but they are starting to rust a bit. It does have bonnet pins that bolt into existing holes in the slam panel. These could easily be removed and filled over, but after loosing my temper with a dodgy and stretched bonnet release cable I had little choice. The top needs some flatting to get rid of some runs and orange peel effect in the 2K primer, but the underside could do with being stripped as I think there was jusy too many coats too quickly. I could do with some new mesh, I did have some but it's on my new car now.

Anyway, here's some pics of the bonnet:

http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0021.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0021.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0020.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0020.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0019.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0019.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0017.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0017.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0016.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0016.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0015.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0015.jpg)

click for bigger pics

[Jon Mc V6`]

Again the leccy sunroof isn't perfect, I never got around to flatting the lips around the light bezel and the slide on cover, also I haven't painted the switch, but the lips are hiddeen when you put the light in and so on. I've never used it sine I bought it off ebay, but everything is there, switch, motor, loom and mounting plate/screws:Cool2:

http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0331image0018.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0331image0018.jpg)

[Jon Mc V6`]

Hi, just joined the forum after searching for Cav/Cal V6 parts. I'm interested in the cylinder heads as my Calibra has dodgy valves on one cylinder. Also will you have an F25 gearbox eventually? The one on my Cav has just gone! (If I had a 3rd car I could take the good gearbox off the bad engine and put it on the good one....but I haven't!)

Unfortunately I'm way away from you on the south coast, so the cylinder heads would have to be couriered.

Nige

More info on the heads, iirc they weigh about 15kg each so parcel2go is £10.56 per head, not really anywhere cheaper. Only issue is when I can get them picked up as I'm away next week with work and the wife is visiting her parents. The other alternative is royal snail which is £12.46 per head and I can get to the post office most days.

http://www.vauxhallownersnetwork.co.uk/showthread.php?t=83442

The gearbox is driving around Exeter way, that went about 2 months ago:cry:

[V6 Masochist]

Hi Jon,

I'll take the Cylinder heads then. Speed of delivery is not important as I'll probably swap the head over Easter and I'll need to order a head gasket too (anybody know anywhere cheap for them? I usually use Autovaux).
How do I pay you? Do you have PayPal?

Cheers,

Nige

[Reverb]

I've got an F25 here.

Jon - any news if that power steering pump went?

[vauxmaster]

More info on the heads, iirc they weigh about 15kg each so parcel2go is £10.56 per head, The other alternative is royal snail which is £12.46 per head and I can get to the post office most days.Jon,

Have check of Interparcel... Iirc... There limit is 30kg for one parcel? :think

Which may help save on p&p costs...

[Jon Mc V6`]

Hi Jon,

I'll take the Cylinder heads then. Speed of delivery is not important as I'll probably swap the head over Easter and I'll need to order a head gasket too (anybody know anywhere cheap for them? I usually use Autovaux).
How do I pay you? Do you have PayPal?

Cheers,

Nige

You have PM, autovaux are as cheap as anywhere, quote that you're a member of this site and they'll usually give you a discount on stock items:lmao:

[Jon Mc V6`]

I've got an F25 here.

Jon - any news if that power steering pump went?

Posted it our yesterday mate:shame:

[Jon Mc V6`]

Jon,

Have check of Interparcel... Iirc... There limit is 30kg for one parcel? :think

Which may help save on p&p costs...

I've tried a few places, and it is cheaper to use parcel2go and send 2 parcels:spam

[V6 Masochist]

Hi Reverb,

What's the details on the F25? Approx mileage/condition/price?
(And how the hell would I get it here!)
I'm off down some scrappies this morning to see if I can find a 'local' one...

Nige

I've got an F25 here.

[Jon Mc V6`]

Hi Reverb,

What's the details on the F25? Approx mileage/condition/price?
(And how the hell would I get it here!)
I'm off down some scrappies this morning to see if I can find a 'local' one...

Nige

for info: Delivery was about £40 when I sold mine but beware of parceluk, they list it as prohibited, but by entering the description as car partsyou can get it through, no-one else would quote sensible money for the size and weight. Just make sure it's double bagged and as much gearbox oil is drained as possible, whatever you do don't let it leak, they get right snotty:lmao:

[chris.s.j.todd]

thanks for the info. will find out how much it would cost and let you know.

[Jon Mc V6`]

thanks for the info. will find out how much it would cost and let you know.

Be warned, parceluk list bonnets as prohibited items, :mmmm

[vauxmaster]

I've tried a few places, and it is cheaper to use parcel2go and send 2 parcels:spamSorry chap... just trying to help! :shame:

[Jon Mc V6`]

Sorry chap... just trying to help! :shame:

No worries, I just find it shocking that royal mail are the cheapest, postvan came a close second with their heavy parcel, £35 kilo limit but £22 plus vat, royal snail cost me just over £23 for both this morning:Cool2:

[vauxmaster]

No worries, I just find it shocking that royal mail are the cheapest, postvan came a close second with their heavy parcel, £35 kilo limit but £22 plus vat, royal snail cost me just over £23 for both this morning:Cool2:Still alot though...

Just checked...

Package = 1 @ 29kg
length = 30cm
Width = 20cm
Hieght = 10cm

Through Interparcel via Parcelforce 12 (before 12pm next working day) = 12.99 + vat (inc my 5% discount)

You pay full price for the first parcel once registered, but get 5% discount after that on any delivery you book through them.

I'll stop posting now, before I get told off for general chat in the forsale forum! ;)

[Jon Mc V6`]

Still alot though...

Just checked...

Package = 1 @ 29kg
length = 30cm
Width = 20cm
Hieght = 10cm

Through Interparcel via Parcelforce 12 (before 12pm next working day) = 12.99 + vat (inc my 5% discount)

You pay full price for the first parcel once registered, but get 5% discount after that on any delivery you book through them.

I'll stop posting now, before I get told off for general chat in the forsale forum! ;)

The total weight for the 2 heads was just short of 35kg with packing (box x 2 and flopack), dims of 55x30x40cm for two heads with no packing
comes in at 28.25 + vat (Titan parcel)

It went over the 30kg limit so that's what blew it:cry:

[vauxmaster]

The total weight for the 2 heads was just short of 35kg with packing (box x 2 and flopack), dims of 55x30x40cm for two heads with no packing
comes in at 28.25 + vat (Titan parcel)

It went over the 30kg limit so that's what blew it:cry:Gutted... yea... 30kg is the limit then u get no choice but the Titan service. :shame:

[205man]

do you still have the brake master cylinder? if is it the one where the brake lines join on both sides? and is it in working order

is so ill have it

alan

[Jon Mc V6`]

do you still have the brake master cylinder? if is it the one where the brake lines join on both sides? and is it in working order

is so ill have it

alan

If this is the one you want, yes I still have it, and yes it was working fine when I took the car off the road, brakes and suspension where about the only bits of the car that didn't have any problems!!!!

http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0401image0002.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0401image0002.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0401image0001.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0401image0001.jpg)

[Jon Mc V6`]

The list is getting shorter

[205man]

yeah thats the one i dont need the servo just the master cylinder but ill take the plastic resvevoir though saves spliting them

how do you want to sort payment? i can paypal etc

alan

[Jon Mc V6`]

yeah thats the one i dont need the servo just the master cylinder but ill take the plastic resvevoir though saves spliting them

how do you want to sort payment? i can paypal etc

alan

Paypal is fine, I'll pm you the address:Cool2:

[Jon Mc V6`]

bump

[Jon Mc V6`]

Bttt

[Jon Mc V6`]

Bttt

[Jon Mc V6`]

Bump

[Jon Mc V6`]

Bump

[Jon Mc V6`]

Up for the end of the night

[Jon Mc V6`]

bump

[Jon Mc V6`]

up!!

[Jon Mc V6`]

bump

[Jon Mc V6`]

bttt

[Wagonist]

Will the idle valve fit a 2.0 8v (is it working)?
Do you have an airflow meter that will fit the same?

[Jon Mc V6`]

Will the idle valve fit a 2.0 8v (is it working)?
Do you have an airflow meter that will fit the same?

The idle valve is working but I doubt it will fit as it was attached to the underside of the manifold. Get me a part no and I can see if they are the same.

AFM has gone:shame:

[Wagonist]

If its the same as the 2.0 16v, then it will fit. Its the same part, just mounted in a different place.

[Jon Mc V6`]

If its the same as the 2.0 16v, then it will fit. Its the same part, just mounted in a different place.

Don't know if it's the same as the 16v or not, I'll get a pic tonite if that helps

[Wagonist]

If its the same as those pictured in this thread:
http://www.vauxhallownersnetwork.co.uk/showthread.php?t=65
then its the same.

[Jon Mc V6`]

If its the same as those pictured in this thread:
http://www.vauxhallownersnetwork.co.uk/showthread.php?t=65
then its the same.

I'll check it when I get home, it looks similar.

[Wagonist]

Please do.
Send me a pm with your phone number so we can work out some payment/delivery details.

[Daniel H]

Hi there mate, what I'm after if possible is.....
Full rear beam
Struts
and break disks + calipers

Do you think you could give me a price you would like for all of these and where your based?
Many thanks mate

Dan

[Jon Mc V6`]

Hi there mate, what I'm after if possible is.....
Full rear beam
Struts
and break disks + calipers

Do you think you could give me a price you would like for all of these and where your based?
Many thanks mate

Dan

Sorry mate, they've all gone

[Jon Mc V6`]

Please do.
Send me a pm with your phone number so we can work out some payment/delivery details.

Here's some pics of mine, looks the same to me:Cool2: , I'll PM you now

http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0410image0002.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0410image0002.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_2006_0410image0001.jpg (http://img.photobucket.com/albums/v521/jonmcv6/2006_0410image0001.jpg)

[Jon Mc V6`]

List editted

[Jon Mc V6`]

Edit

[Jon Mc V6`]

bttt

[Jon Mc V6`]

Up!!!