sportex 4-2-1 manifold 8v

[baxter]

i have here one extramly good condition, manifold, never used on the road but bolted to car,

its for the cavailer 8v (cat cars) i had this bolted to a 1.8 8vspi head, and the 20ne head, so i think it will fit all large block 8v engines,

cost 140pounds about 3 weeks ago

im after 110 collected or 125posted, can suply new gaskets
http://www.tuning.co.uk/vauxshop/media/SPV240101.jpg

[Iain L]

did you use the car when it was on?? Just wondering if a sports mainfold makes much difference? :Cool2:

[baxter]

i used my other one, (rusted thru) thats why i got this one, you can only really notice an improvement if oyu have other mods ect: cam,

which i have a 20Ne kent cam kit forsale, done about 500miles, im after 140 for that, cost me 330 about 1 month ago

Powerband = 1000-6000rpm.
Valve Lift (Inlet/Exhaust) = 12.44mm
Duration (Inlet/Exhaust) = 262 Degrees
Timing (Inlet Open/Close)/(Exhaust Open/Close) = 21/61 61/21
Full Lift (Inlet/Exhaust) = 110 Degrees
Valve Clearance = 0.00mm