Breaking V6 cavalier

[Jon Mc V6`]

These are the bits and pieces I have left with starting prices.

Water Pump, 18 months old - £15
Cat - £50 provisionally sold
Idle Air Control Valve - £25
spare wheel (With 205/50x15 tyre) - £15
Fan - £20
Washer bottle incl motor - £10
Various relays – ask
Heater motor - £15
Plug leads, 12 months old genuine Vaux, cost £180 - £50
Engine cover, red centre cap will be primed ready to be colour coded - £20
Electric sunroof conversion (flatted and primed roof panel ready for colour coding) - £20
Throttle Cable - £5
ABS ECU Module - £25
Traction control motor and butterfly - £20
Fuel rail and injectors - £20
Custom door pockets (to fit 6 ½ “ speakers) with kerb light lenses (but no lights) - ask need to be painted or covered
PAS Pump - £20 SOLD awaiting payment
The covers off the back of the door mirrors that cover the screws suitable for electric or aftermarket mirrors - £5
Fuel flap, stripped ready for painting - £5
Locking fuel cap - £5
Boot locking motor - £5
Fuel flap locking motor - £5
All 4 seatbelts with working recoil - £10 each
Rear lap strap - £5
Clutch cable - £10
Power steering reservoir - £5
Wiring loom is out, but no good as a loom as it was modified, but I'll cut off connectors etc as required.
Starter Motor - £25
Brake master cylinder - £25
Steering rack (power steering) - £30
Quad 5" exhaust, not a direct replacement but fits onto standard centre pipe, requires spare wheel well cutting out and new hangars fitting - £200
Front subframe complete with wishbones and poly wishbone bushes - £50 collect only
Full sunroof, sometimes the air diffuser stays up when closing it, but I've never investigated why - £50, collect only
Full set of de-locked and dehandled doors with belnded aftermarket base plates, requires sanding and painting - offers, I can offer solenoid kits and M6 mirrors with indicators built in and push button door opening buttons for extra. The passenger door needs a new loom or my modified loom splicing into your car. The original connector corroded and I re-wired it.
Bonnet with flush evo vent and fibreglass badyboy, requires sanding and painting - £50, pick up only


All item plus postage. Open to offers so please feel free to make sensible offers and ask for more info on specific bits. I am still breaking the engine and sorting out the bits in the garage so I’ll add/remove bits as appropriate.

[v6 lump]

just wondering do you have the dis unit and if so how much are you afetr for it including postage can you give me a bell on 077333 27719

[Jon Mc V6`]

just wondering do you have the dis unit and if so how much are you afetr for it including postage can you give me a bell on 077333 27719

dispack was knackered, one of the faults that convinced me to break it.

[Jon Mc V6`]

^^^^^

[CavBayBen]

Do you have the alarm module that sits next to the glovebox? If so I'd want it with the plug and about a foot of wiring. Let us know!

[Jon Mc V6`]

Do you have the alarm module that sits next to the glovebox? If so I'd want it with the plug and about a foot of wiring. Let us know!

Always had an aftermarket alarm since I owned it so I don't think so but I'll check it first thing in the morning:Cool2:

[Jon Mc V6`]

Do you have the alarm module that sits next to the glovebox? If so I'd want it with the plug and about a foot of wiring. Let us know!

Only wiring and connectors in there, nothing that could be an alarm module, sorry mate.:shame:

[CavBayBen]

Only wiring and connectors in there, nothing that could be an alarm module, sorry mate.:shame:

No probs. it seems even though 95% of cavaliers should have them, when it comes to breaking them, they're all missing heh.

[Jon Mc V6`]

More

PAS Pump - £25
The covers off the back of the door mirrors that cover the screws suitable for electric or aftermarket mirrors - £5
Fuel flap, stripped ready for painting - £5
Locking fuel cap - £5
Boot locking motor - £5
Fuel flap locking motor - £5
Central locking motors x2 - ##SOLD##
All 4 seatbelts with working recoil - £10 each
Rear lap strap - £5
V6 Rocker covers, black plastic, no leaks and only 12 months old so the rubber gasket should still be good - £20 the pair
Clutch cable - £15

Open to offers for any of the bits listed in this thread. Let me know if there is anything else you need.

[Dunc]

Flywheel still kicking about?

[Jon Mc V6`]

Flywheel still kicking about?

Yep, when I get a crane and get the engine and box out it is here. Hopefully I'll be able to borrow a crane off a guy in work in week after next.:rolleyes:

[ajrat]

hi mate how much for the rear hubs (abs i assume)?

Cheers Adam

[Jon Mc V6`]

hi mate how much for the rear hubs (abs i assume)?

Cheers Adam

Sorry mate they're gone

[Dunc]

Yep, when I get a crane and get the engine and box out it is here. Hopefully I'll be able to borrow a crane off a guy in work in week after next.:rolleyes:
Let me know how much you want, and cash flow pending I'll buy it off ya?!

[Rich Cav V6]

Can you tell me how much it would cost to post the down pipes? (if they are good condition).
PM me if needed.

[Jon Mc V6`]

Can you tell me how much it would cost to post the down pipes? (if they are good condition).
PM me if needed.


PM(S) sent, ignore the first, I clicked submit instead of preview:shame:

[Jon Mc V6`]

^^^^^

[Jon Mc V6`]

Power steering reservoir - £5
Wiring loom is out, but no good as a loom as it was modified, but I'll cut off connectors etc as required.
Handbrake - £5

Just ask, the interior has gone, but some bodywork bits available, vented bonnet, delocked and dehandled doors, one-off front bumper etc

[Jon Mc V6`]

bump

[Jon Mc V6`]

^^^^^

[Jon Mc V6`]

Open to offers and the engine should be coming out next week if my mate remembers to bring his grane into work

[Jon Mc V6`]

TC Motor - £15
Heat exchanger - £25

[Jon Mc V6`]

Up for the weekend

[Jon Mc V6`]

cool running thermostat - £5
MAF Sensor (not in the pipe, seperate) - £10

[Jon Mc V6`]

Set of equal length shafts and the short shaft that goes across the back of the block. Missing the inner CV joint between the outer shaft and half shaft on the drivers side - £25 plus delivery

[Jerry Shaw]

I'm after a decent expansion tank.

Mines got a crack on one of the pipe fittings.

Let me know......PLEEEEEASE.
:Cool2::bananasmi :Cool2:

[Jon Mc V6`]

I'm after a decent expansion tank.

Mines got a crack on one of the pipe fittings.

Let me know......PLEEEEEASE.
:Cool2::bananasmi :Cool2:

Sorry mate mine went about a fortnight ago:shame:

[Jerry Shaw]

Bugger! HA HA, never mind.

Thanks for letting me know

[kcmillar]

could you send me pics of the bonnet please........

[Jon Mc V6`]

could you send me pics of the bonnet please........

PM Sent

[caza]

dont suppose you have a power steering pump and also do you know if the same as cavalier turbo cheers i need one

[Jon Mc V6`]

dont suppose you have a power steering pump and also do you know if the same as cavalier turbo cheers i need one

Yep, I've got one but I don't know if they're the same. This one sits in the engine mount at the front of the block, do these pics help:rolleyes:

http://img.photobucket.com/albums/v521/jonmcv6/th_PASPump2.jpg (http://img.photobucket.com/albums/v521/jonmcv6/PASPump2.jpg)
http://img.photobucket.com/albums/v521/jonmcv6/th_PASPump1.jpg (http://img.photobucket.com/albums/v521/jonmcv6/PASPump1.jpg)

[caza]

cheers mate get in touch tommorrow pissing it down outside and dark, if it is the same how much including postage and without thanks again

[Jon Mc V6`]

cheers mate get in touch tommorrow pissing it down outside and dark, if it is the same how much including postage and without thanks again

Call it £25 delivered or £20 if you pick it up.

[Jon Mc V6`]

Engine came out last night, I'll start stripping the last few bits off that on thursday. Got a good gearbox availabale, re-buit a couple of years ago after a selector fork went. Open to offers.

Dunc - You still want the flywheel.

[Jon Mc V6`]

Bump

[Jon Mc V6`]

List amended

[Jon Mc V6`]

Up!

[cavyman]

heater matrix do u still have it for sale m8? l need one

[Jon Mc V6`]

Yep, sat in the garage:Cool2:

[Jon Mc V6`]

bump

[Torquemada]

HI Jon,

Just how modified is the loom? I need the ECU section, if you're willing to separate it from the rest. :wub:

My lambda burnt it's heater wire out, and I'd like to get the car back to original condition in that area, rather than have too manv extra bits of wire floating about.


Cheers, Pete.

[Jon Mc V6`]

HI Jon,

Just how modified is the loom? I need the ECU section, if you're willing to separate it from the rest. :wub:

My lambda burnt it's heater wire out, and I'd like to get the car back to original condition in that area, rather than have too manv extra bits of wire floating about.


Cheers, Pete.

It's mainly the body loom that I've got, the ECU loom wnet with the ECU when I first broke the car.

[Torquemada]

Ok, cheers Jon.

[Jon Mc V6`]

bttt

[Jem-Pot]

Hi Jon,
Have you still got the down pipe:mmmm ? How much if so? Cheers, Jem.

[Jon Mc V6`]

Hi Jon,
Have you still got the down pipe:mmmm ? How much if so? Cheers, Jem.

Sorry mate sold them last week

[Jon Mc V6`]

more added

[Cav V6 Tracker]

Do you have the exhaust manifolds mate ?

[Leehollingworth]

need a crank sensor for c25xe if its the same and you have 1? pm me with price and i'll have it off ya!

[Jon Mc V6`]

Do you have the exhaust manifolds mate ?

Sorry, sold them last week

[Leehollingworth]

Sorry, sold them last week

Any chance of the automatic ariel if it works?

[Jon Mc V6`]

Any chance of the automatic ariel if it works?

Gone I'm afraid, I'm pretty much down to whats in the list, a stripped engine, gearbox and some modified bodywork. Been breaking since about Oct/Nov last year

[Reverb]

Hi Jon, you get that money I sent?

[Jon Mc V6`]

Hi Jon, you get that money I sent?

Yes mate, your bits are on their way

[Jon Mc V6`]

need to clear everything before I move house so make me an offer

[specks]

have u still got the driveshafts,im still no wiser if the manual ones will fit,but are the cv joints good,cos mine are clicking like mad,also the cool running thermostat,pm me cos im so forgetfull:Cool2: .

[Torquemada]

Hows £40 plus shipping sound for the gearbox Jon?

I'm not planning a trip up north for several mths, so it'll have to be posted. ;)

[Jon Mc V6`]

Hows £40 plus shipping sound for the gearbox Jon?

I'm not planning a trip up north for several mths, so it'll have to be posted. ;)

Call it £50 plus shipping and you have a deal, you know any companies that'll ship at a reasonable rate?:rolleyes:

[Torquemada]

Call it £50 plus shipping and you have a deal, you know any companies that'll ship at a reasonable rate?:rolleyes:

Any chance you could weigh it? I'll shop around for a courier or whatever.

[Torquemada]

http://www.e-parcels.co.uk/

Check this out. 30kg for £10 :eh Seems really cheap. Though they are not actually a courier service themselves, they arrange the service and you only get charged more if the item isn't ready for collection, or over weight, or something else is outside of the initial agreement.

http://www.deliverebay.co.uk/index_files/Page344.htm

Sister company to the above, for larger items. :up:

[Jon Mc V6`]

Parcel2go is great, £10.56 for up to 25kg, and it's a part of DHL. Deliverebay have refused to deliver a bonnet for me in the past, so I don't expect they'll be great with a gearbox.

http://www.parceluk.co.uk/premium.php

About £35 plus VAT for the box. I'll have to get accurate weights and dims tonight, but iirc it's about 45-50 kilos

[Jon Mc V6`]

Deliveryebay want £48 plus VAT so parceluk is the cheapest

[Torquemada]

Okys, cheers for that Jon.
I'll take the gearbox please, can I paypal you in a couple of days?
Pm-ing you my address and email.

[uglymonkey]

do you still have the twin horns Jon? I'll have them if you do ... :up:

[Jon Mc V6`]

do you still have the twin horns Jon? I'll have them if you do ... :up:

Sold em last week mate

[Jon Mc V6`]

list amended

[Reverb]

Got that package Jon :Cool2:

[Jon Mc V6`]

Got that package Jon :Cool2:

Cheers for letting me know, you'll have to let me see the finished job when the manifold is done:cool:

[Reverb]

Yep - i'm going to do a small area tonight and see how it comes up
got some polishing paste and a dremel :Cool2:

[Jon Mc V6`]

editted

[Jon Mc V6`]

bump

[Jon Mc V6`]

bumpety bump

[Jon Mc V6`]

bttt

[Jon Mc V6`]

up up up and away

[Jon Mc V6`]

list editted

[Torquemada]

Gearbox received in apparently good order. :Cool2:
The carriers thought it might have been damaged due to the box getting a bit oily. :rolleyes: :lmao:
It's fine really.

Cheers Jon.

Mine has some slack in it, so the replacement'll get fitted some time soon.............ish ;)

[Jon Mc V6`]

Gearbox received in apparently good order. :Cool2:
The carriers thought it might have been damaged due to the box getting a bit oily. :rolleyes: :lmao:
It's fine really.

Cheers Jon.

Mine has some slack in it, so the replacement'll get fitted some time soon.............ish ;)


Cheers Pete, should be a bit tighter, it was rebuilt by Bristol Gearboxes about 40K miles ago after it dropped a selector fork. Been okay ever since:Cool2:

Rather you than me changing it, I had the adavntage of cutting the front end of the car away and craning the engine out to remove it:bust:

[Jon Mc V6`]

would consider a swap for cash:Cool2:

[Jon Mc V6`]

bump

[Jon Mc V6`]

Bump

[Jon Mc V6`]

bttt

[Jon Mc V6`]

bump

[Torquemada]

BTT for big Jon. :Cool2:

[Jon Mc V6`]

And again

[Jon Mc V6`]

Open to offers on all of this stuff, need space in the garage for the new car

[Leehollingworth]

do you still have the fuel pump relay? if so how much?

[Jon Mc V6`]

do you still have the fuel pump relay? if so how much?

I've got it, just need to identify it out of a box of relays, £5 delivered, do you know the part no

[Leehollingworth]

sorry mate don't need the relay now but my hazards have just gone pete tong and i need the facia for the centre dash fan with the hazard button in the centre or just the button if you have it? mine is a 95 cdx

[Jon Mc V6`]

sorry mate don't need the relay now but my hazards have just gone pete tong and i need the facia for the centre dash fan with the hazard button in the centre or just the button if you have it? mine is a 95 cdx

Haven't got the facia, but defo got the hazard switch, £3 delivered

[Jon Mc V6`]

bump

[Jon Mc V6`]

bttt

[Jon Mc V6`]

bump

[Jon Mc V6`]

bttt

[Jon Mc V6`]

some prices reduced, look in

[Jon Mc V6`]

bump

[Jon Mc V6`]

bttt

[Jon Mc V6`]

list amended

[Jon Mc V6`]

bttt

[Jon Mc V6`]

bump

[Jon Mc V6`]

anyone need any engine bits, I'm about to start breaking the block, 2 good heads, cambelt and tensioners are only 20000 miles old

[Jon Mc V6`]

bump

[Old Red]

Is the alternator still available? i couldn't see any other reference to it!
cheers

[Jon Mc V6`]

Is the alternator still available? i couldn't see any other reference to it!
cheers

Yes it is and I've replied to your PM:Cool2:

[Jon Mc V6`]

Alternator now sold, cheers Paul

[Jon Mc V6`]

bump

[Jon Mc V6`]

up she goes

[Jon Mc V6`]

bump

[Jon Mc V6`]

Bump

[Jon Mc V6`]

Up we go!!!!!

[Jon Mc V6`]

bump

[Jon Mc V6`]

bumpski

[Jon Mc V6`]

List editted

[Dunc]

Jon, could well be after an alternator, is yours still about?!

[Coppen]

After the complete ignition switch as a unit as mine is knackered...still got it???

Don't suppose you have the ECU left??? After a red top non-immob type one.

:bananasmi

[Jon Mc V6`]

Jon, could well be after an alternator, is yours still about?!


Sorry Dunc, it's gone

[Jon Mc V6`]

After the complete ignition switch as a unit as mine is knackered...still got it???

Don't suppose you have the ECU left??? After a red top non-immob type one.

:bananasmi

All gone very early on, sorry:shame:

[Jon Mc V6`]

^^^^^

[Jon Mc V6`]

up we go

[Jon Mc V6`]

up up and up

[Jon Mc V6`]

Bump

[Jon Mc V6`]

bttt

[Jon Mc V6`]

Bump

[Jon Mc V6`]

Bump

[Jon Mc V6`]

bump

[Jon Mc V6`]

bump

[norm_gsi16v]

is it a hatch if so do u have a complete tailgate ????????

[Jon Mc V6`]

is it a hatch if so do u have a complete tailgate ????????

It was a hatch, however it was heavily modified and is probably no good to you. The only original bit on it is the glass:shame:

[norm_gsi16v]

It was a hatch, however it was heavily modified and is probably no good to you. The only original bit on it is the glass:shame:

oh ok then not to worry :shame:

[Jon Mc V6`]

Bump

[stuboy]

handbrake gaiter?

[Jon Mc V6`]

handbrake gaiter?

Sold it mate sorry,:shame:

[Jon Mc V6`]

Bump

[Jon Mc V6`]

up we go again

[Jon Mc V6`]

Bump

[Jon Mc V6`]

^^^^^

[Jon Mc V6`]

Bttt