PDA

View Full Version : Itg foam filter for omega (may fit others)


blotto_otto
10-12-2005, 06:48 PM
Bought this off a cavwebber on here for £25 (excuse me for forgetting who it was, brain has blown a fuse at the moment)
Good condition and complete with the spray as well. Looking for £20 as i have only used it a couple of times and they are a bit more expensive than this!
blotto_otto
10-12-2005, 11:46 PM
still here.
laidback66
11-12-2005, 11:16 AM
Nice filter.. I can recommend it! ;)
blotto_otto
11-12-2005, 12:18 PM
Nice filter.. I can recommend it! ;)
i bet! it was yours wernt it?
Mat
11-12-2005, 04:35 PM
Damn,this close to christmas too.
blotto_otto
11-12-2005, 09:13 PM
its still here.
Tidzy
11-12-2005, 09:14 PM
got any pics matey and will it fit a gsi cavvy????
blotto_otto
11-12-2005, 10:37 PM
http://www.koni-shocks.co.uk/frame-detail.asp?PAGE=/ITG-filters.htm
filter far right of pic (was gonna hotlink but wont let me lol)
Would have thought it wowuld fit to be honest, cant see why not and it comes with a can of spray stuff as well.
Vauxhallmadscott
12-12-2005, 08:23 AM
Whats The Gains From It
blotto_otto
12-12-2005, 10:46 PM
Whats The Gains From It
sound for one, not ott but just right, slight better lower down response etc. Nothing spectacular but its noticable!
blotto_otto
13-12-2005, 09:35 PM
boing boing!!
blotto_otto
14-12-2005, 07:12 PM
anyone?
blotto_otto
15-12-2005, 07:50 PM
bttt with ya!
Matt N
15-12-2005, 08:02 PM
Any idea what part number it is and if it'll fit a V6 Vectra?
blotto_otto
15-12-2005, 08:11 PM
not sure of the part number but pretty sure it would fit a v6 veccie as it fitted to a mates v6 cav perfectly fine
Matt N
15-12-2005, 08:14 PM
Had a look on a couple of sites and I can't find one listed for an Omega and the Cav part number is different to the Vectra.
blotto_otto
15-12-2005, 08:23 PM
tell ya what, tomorrow, i shall measure the neck for you but probably better to ask on here if you want a definate. I recall when evil was on here, he offered the exact same one to me for the cav v6.
Matt N
15-12-2005, 08:28 PM
ahhh... it's a cone? for some reason I thought it was a panel :O. Thanks anyway :up: :beer:.
AKA CARS
15-12-2005, 08:34 PM
pm sent
blotto_otto
15-12-2005, 10:50 PM
pm sent
and replied
for those requesting pics, this is the best i can find. mine has the chromed end with a neck approx 3" wide (rough guess) but no trunking.
http://i14.ebayimg.com/03/i/04/8e/59/9a_1_b.JPG
tis from ebay this pic and mine will come with the spray can as well.
blotto_otto
16-12-2005, 07:48 PM
boingy boing!!
blotto_otto
17-12-2005, 12:00 PM
still around. cheap as chips and bloody good condition!
goonas
17-12-2005, 01:30 PM
This will fit the V6 Cav/Cally and Vectra... This cone was on my old Vectra ;)
blotto_otto
17-12-2005, 02:26 PM
ahhh, cheers marc :)
blotto_otto
17-12-2005, 11:39 PM
i dont get any money till the 28th so somoene would be doing me a favour! think of it as charity lol!!
blotto_otto
18-12-2005, 12:10 PM
Right, just measured the neck and its 75mm so who wants it?
blotto_otto
19-12-2005, 01:42 AM
cant really get any cheaper!
blotto_otto
19-12-2005, 08:11 PM
Come on, somoene buy me to enable my owner to have a beer at christmas!
mike_bristol83
20-12-2005, 02:25 AM
Free bump :up:
blotto_otto
20-12-2005, 06:34 PM
cheers mike!
Mat
20-12-2005, 10:28 PM
Ah feck it,where we going to meet bitch ?:lmao:
blotto_otto
20-12-2005, 10:47 PM
Ah feck it,where we going to meet bitch ?:lmao:
Um, i dont get paid till the 28th december so if ya wants it, you can either wait till then or pop over in the evening (if you come over, ill knock a fiver off for the bridge?)
Mat
21-12-2005, 06:26 PM
Leave it til the 28th fella,i'm a bit busy til then.

Pm me when your ready,and we'll meet up.
blotto_otto
21-12-2005, 08:25 PM
yup no worries. shall be around either on the 28th or therabouts. Easier for me to meet you at magor as i aint got no time off at all for the next month or so and have to be within half hour of work at any time.
Mat
23-12-2005, 08:41 PM
You have my number i'm sure,if not i'll txt you.