PDA

View Full Version : bit of a clear out



vectra_16v
22-08-2008, 02:15 PM
well having a bit of a clear out so heres the list so far

x20xev air flow meter £10

ecu chip and transponder removed from a 2l vectra x20xev £30

close ratio F16 gearbox for sale in good conditon converted to hydraulic with a brand new concentric slave cylinder fitted £60

vectra gsi front bumper for sale, in need of some tlc it has had a previous repair just under one of the side grills which has cracked it missing one of its side brackets (easily replaced from a scrap yard) the 2 pieces that come up and attach to the holes on the light brackets are also damage but has no affect as they still clamp down. it is a genuine irmscher bumper will put some pics up tomorrow i have priced this to reflect the damage SOLD


x20xev inlet manifold with throttlebody attached £15 (have a few of these)


i am located on tyneside the gearbox and bumper are collection only the rest can be delivered but at extra cost


http://i38.photobucket.com/albums/e137/astrachris/Photo-0171.jpg
http://i38.photobucket.com/albums/e137/astrachris/Photo-0172.jpg
http://i38.photobucket.com/albums/e137/astrachris/Photo-0173.jpg
http://i38.photobucket.com/albums/e137/astrachris/Photo-0174.jpg
http://i38.photobucket.com/albums/e137/astrachris/Photo-0176.jpg
http://i38.photobucket.com/albums/e137/astrachris/Photo-0175.jpg

cavauto1600
22-08-2008, 04:48 PM
x20xev air flow meter £10

Is this for a Vectra and how much posted? My next door neighbour needs one for his Vectra 2.0

vectra_16v
22-08-2008, 05:00 PM
yeah mate was removed from a vectra 2l ecotec £15 delivered if you are interested

vectra_16v
26-08-2008, 07:58 AM
bump

wolf35930
31-08-2008, 05:01 PM
Does it have the electronic heater controls? Or the good old dial to adjust the temp in the car?

vectra_16v
31-08-2008, 05:49 PM
havent got any heater controls sorry

wolf35930
31-08-2008, 06:01 PM
Not actually after the controls, I'm in need of the motor that drives the air flow slide. If you haven't got that either, don't worry. Cheers anyway.

vectra_16v
01-09-2008, 09:13 AM
was cables mate