Straight Through Stainless Steel Exhaust V6 or 2.0 Ecotec

[calibra_v6]

Custom made s/steel straight through system for Calibra fits from cat to rear box and does away with centre silencer, awesome sound especially on a v6

may also fit Cavalier?

http://img156.imageshack.us/img156/7592/dsc00281tn2.jpg

http://img156.imageshack.us/img156/909/dsc00280je6.jpg

(will polish up nicely)

£30, PayPal accepted.

Collection welcome anytime from mid wales. Postage I think is possible via ParcelForce for £13

[calibra_v6]

price drop, grab a bargain

[calibra_v6]

bump

[vauxmaster]

Matt will this definately fit a Cav GSi?

Whats the bore size?

EDIT~

Mmm, don't think it will?

http://i67.photobucket.com/albums/h311/vauxmaster/GSi_Project/GSi_Project022.jpg

http://i67.photobucket.com/albums/h311/vauxmaster/GSi_Project/GSi_Project008.jpg

[calibra_v6]

would prob fit cav v6, and might fit yours too looking at those pics,

i'll measure up the bore size

[calibra_v6]

o/d where rear silencer slides over - 60mm

o/d of system - 67mm

[djgritt]

would prob fit cav v6, and might fit yours too looking at those pics,

i'll measure up the bore size



I'm not sure it will due the routing of the System - The Cavalier V6/Ecotec's all had Rear Beam Suspension, where the Calibra's were all IRS...

Could be wrong though for Centre Section only...

[vauxmaster]

o/d where rear silencer slides over - 60mm

o/d of system - 67mmSo it's a 2.5" I.D system with a 1.5" I.D reducer on the end for the back box roughly speaking?

Was it seriously loud Matt?


I'm not sure it will due the routing of the System - The Cavalier V6/Ecotec's all had Rear Beam Suspension, where the Calibra's were all IRS...

Could be wrong though for Centre Section only...NO it won't fit a beam Cav I'm sure... I was asking if it would fit the Cav GSi... As it has IRS and is 2wd?

Mmm, I wonder... :mmmm

[calibra_v6]

hi again, as regards size, it bolts up to standard cat and standard rear box fits onto it no probs looking at my measurements again it would be...

2.25" i.d where rear silencer slides over
2.5" i.d system

as for sound, would really depend on what rear box you ran with it, with a scorpion or similar on the rear will sound ace! even with a stock rear box it will sound good

[calibra_v6]

The Cavalier V6/Ecotec's all had Rear Beam Suspension, where the Calibra's were all IRS


NO it won't fit a beam Cav I'm sure... I was asking if it would fit the Cav GSi... As it has IRS and is 2wd?

ok so won't fit cav v6 or ecotec, but good chance of it fitting the gsi then :Cool2:

[vauxmaster]

hi again, as regards size, it bolts up to standard cat and standard rear box fits onto it no probs looking at my measurements again it would be...

2.25" i.d where rear silencer slides over
2.5" i.d system

as for sound, would really depend on what rear box you ran with it, with a scorpion or similar on the rear will sound ace! even with a stock rear box it will sound goodMatt,

Just found this on eBay while searching for pics to see whats what.... and I'm not sure the rear part is shaped correctly to fit?

Says it will fit - ALL of the following models; Cavalier GSi-2wd,Calibra 2.0-8V (90-97),Calibra 2.0-16v (90-93). We also have a RACE TUBE for the 2.0-16v (93-97) and 2.5-V6

http://i9.ebayimg.com/05/i/000/f5/56/da4b_1.JPG

Does the rear most section have the same angle as in the pic it looks like it's angled up and doesn't bend back down?

Sorry for the questions just trying to work out if it will need work to fit or will fit straight on. :O

[calibra_v6]

ah yeah i see now, the joint on your rear box is at opposite angle.

fitting an ecotec rear box might solve that?

[calibra_v6]

price drop to 30quid :p

[vauxmaster]

ah yeah i see now, the joint on your rear box is at opposite angle.

fitting an ecotec rear box might solve that?Yep... could do, or just get the end where it fits to the back box redone. :Cool2:


price drop to 30quid :pWas gonna offer £40inc postage? :p

[calibra_v6]

hi, think its sold now sorry mate, just looking into postage options

[vauxmaster]

hi, think its sold now sorry mate, just looking into postage optionsBugger! :lmao:

If the sale falls through lmk... :Cool2: