LEE69
04-04-2008, 07:05 AM
WIRING INFO
brown to earth
black to ignition (found on interior light)
white/black to reversing light wire (found in the passenger footwell - same colour)
grey/black to the interior light grey wire.
You have no tint when in reverse so you can see where you are going.
The light sensor is deactivated when the interior light is on to prevent the light dimming the mirror.
You may be left with another 7 wires which are for electric adjustment of the mirror. If you wish to connect this up details are below.
Fit another vauxhall mirror adjustment switch e.g. by the gear leaver. A late switch would be best (e.g from a vectra) without the heater button or led.
Connect the following switch wires up to the electric window switch connectors under the handbrake grip.
Black to Black (ignition)
Brown to Brown (earth)
Connect black/red to black/red on the omega mirror
Connect yellow to blue/red on the omega mirror
Connect green to blue/white on the omega mirror
If the switch moves in the wrong dirrection, i.e up/down when it should go left/right. Swap the yellow & green wires round.
And this is it dimming and then slowly going back to normal.
http://img.photobucket.com/albums/v341/leegsi73/th_OmegaMirror.jpg (http://smg.photobucket.com/albums/v341/leegsi73/?action=view¤t=OmegaMirror.flv)
£35 delivered.
brown to earth
black to ignition (found on interior light)
white/black to reversing light wire (found in the passenger footwell - same colour)
grey/black to the interior light grey wire.
You have no tint when in reverse so you can see where you are going.
The light sensor is deactivated when the interior light is on to prevent the light dimming the mirror.
You may be left with another 7 wires which are for electric adjustment of the mirror. If you wish to connect this up details are below.
Fit another vauxhall mirror adjustment switch e.g. by the gear leaver. A late switch would be best (e.g from a vectra) without the heater button or led.
Connect the following switch wires up to the electric window switch connectors under the handbrake grip.
Black to Black (ignition)
Brown to Brown (earth)
Connect black/red to black/red on the omega mirror
Connect yellow to blue/red on the omega mirror
Connect green to blue/white on the omega mirror
If the switch moves in the wrong dirrection, i.e up/down when it should go left/right. Swap the yellow & green wires round.
And this is it dimming and then slowly going back to normal.
http://img.photobucket.com/albums/v341/leegsi73/th_OmegaMirror.jpg (http://smg.photobucket.com/albums/v341/leegsi73/?action=view¤t=OmegaMirror.flv)
£35 delivered.