Sort of breaking 3.0 v6 omega vectra gsi

[palmer3914]

hi guys

im braeking my old omega track car.. as for some stupid unknown reason decided to break the 1995 omega 3.0 ex cop.:bust: .. and go and buy... a mint 2001 MV6... to strip and track..... must need my head read!!!!

ah well all in the name of fun!! ha ha

so i have .

3.0 v6 bottom end.... 1998 engine with 55k on.... slight rust in bores so needs a hone... no flywheels or anything just a GOOD SOND BOTTOM END. - £75

3.0 v6 engine which had apparently covered 56k going by my speedo in car.. cant warrent.. no knoeck or bangs.. ran sweet as a nut....
head gaskets just done.... as in 1 mile ago... new belt and tensioners...... heads skimmed .40mm , new lifters, got fresh fully synthetic oil in.... starts, runs idles perfect... not a noise from it........... never driven though as no MOT/TAX and no track days.... so can be heard running but make it quick as it will be coming out very soon.... No inlet plenom at all as this is the engine i was running with GSI Vectra stuff????:D
OR can sell bottom end and il take heads off..... Up to you. - £300 engine inc heads exhaust manifolds

Have a set of 4 G numbered MV6 cams 55k - £150 also on ebay

Enlarged 70mm vectra v6 throttle body - £100 also on ebay

GSI inlet plenom top and bottom inc 10 black hoses £60

have a 2nd set of 10 hoses - £20

Have various omega 3.0 throttle bodys £15 each

standard vectra body - £20

later style top plenom omega - £25

early style plenom - £20

3.0 bosch 2.8.1 ECU - chipped.... with key and transponder - £80

Coil packs x2 early ones with plug on side - £20 each

and prob various other bits......

JUST ASK IL SEE IF I HAVE THE BITS YOU WANT....

Prices are on OFFER BASIS JUST e.mail me

matthew@palmer3914.fsnet.co.uk



cheers:bananasmi

[ebt1]

how much for the cams?

[palmer3914]

you tell me mate as said offer basis.... make an offer and before you ask yes its for the 4 .... came out of low miles car / apparently cant confirm.. 3.0v6 Mv6/elite

cheers

[Cerifwrdd]

looking for a 3.0 full engine .. need an idea of what you want for it tho..

ta

[palmer3914]

as in block and heads only or inlet manifold as well / injectors/ fuel rail.... throttle body etc?? if you PM mw what you want and and offer for all the bits we can talk from there mate, not looking for silly money !!

[Cerifwrdd]

basically, i've cooked the heads.. and the cars' been standing for months and there has been water standing in the bores.

can't be arsed to strip it and hone and rebuild.. so just want to drop a new lump in there.

give me an idea of what you have and what you want for it.

:)

[palmer3914]

well pretty much it would be engine / heads no inlet manifolds exhaust manifolds inc...... i say no inlet as it is sitting in the car at moment with vectra gsi inlet on it........

so pretty much block / heads.... New head gasket , new water pump, new cam belt and tensioner fitted 1 mile ago.. as in 1 mile if that..... newer lifters in head 13k, skimmed .40mm, filledwith millers fully synthetic.......

when we did head gasket we left cam belt and pullys exposed due to "looking cool" ha ha ha engine had very little wear in bores so def stood up to less than 100k in mour eyes, heads very clean, just outside of engine is think with nasty old oil, where years of spilling it and dirt sticking to it have taken there toll......... this engine has not been tested though since doing it, have taken it up roasd and back, no smoke, knocks, noises at all........ but thats all i can say...... runs sweet as it can , doesnt or didn't ,miss a beat....... started on the key everytime

Have been offered £300 for it not heard from since mind you.... thats the only offer i have had on it worth talking about, one was £90 from i guy down the road!!! ha ah ah still laugh now...

hope this helps

engine according to my speedo done in region of 55k, when we did head gasket and other bits

[Mat]

Your going to need to put prices up for the thread to stay alive fella, forum rules.

[palmer3914]

ok dude thanks for that....

[106rallye]

hey are you still breaking this? of so do u have a heater matrix in good condition?

Cheers

[palmer3914]

sorry mate haven't checked for ages.... car gone to scrap yard in the sky... with matrix in it.. sorry mate

[mikeyh]

looking for a 3.0 full engine .. need an idea of what you want for it tho..

ta

iv got one sitting out of the car and complete also still got the auto box attached lol